particular surface area

[AC Design]

Good evening to all.. .
I'm going crazy to try to create this surface.. I can't find the right combination to make it... I like the curves a lot and I want the surface to recover as much as possible.

Can you help me?

I try to create the network with the curves you see. the final outline of the ring is the one marked with red curves. the other use for construction...I have already tried different forms, but without result.

You think it's possible to have a single surface or do I have to break it?

the open curves that you see in the upper part I traced them to give continuity to the same, to have the passing surface between these which then will be cut with the ellipse below. . .

Thank you very much for your answers.

alessandro.

 

[Il marangon]

I did a couple of tests with your curves but I see it rather difficult to make a unique surface with that shape

I think it's your turn.

 

[RS4]

Good evening to all.. .
I'm going crazy to try to create this surface.. I can't find the right combination to make it... I like the curves a lot and I want the surface to recover as much as possible.

Can you help me?

I try to create the network with the curves you see. the final outline of the ring is the one marked with red curves. the other use for construction...I have already tried different forms, but without result.

You think it's possible to have a single surface or do I have to break it?

the open curves that you see in the upper part I traced them to give continuity to the same, to have the passing surface between these which then will be cut with the ellipse below. . .

Thank you very much for your answers.

alessandro.

Bye-bye.

I would be curious to see the complex of this surface and maybe make my contribution somehow, you could attach an iges file


Hi.

♪

 

[AC Design]

@marangon

Good morning, thank you for replying. How would you suggest to split the curves?

Thank you!

 

[AC Design]

@rs4

Thank you very much.

 

[RS4]

@rs4

Thank you very much.

Good morning:


but I do not see the annex

 

[AC Design]

ops...... let's see....

 

[RS4]

Bye-bye.

here I think the solution and many tangent pacths among them

I see a little difficult at least in catia v5 in a single surface

I have done so many pacth but you could do even half and mirror as styling method

allego images
foto 1 with him 4 saw
foto 2 denotes the part not in central ring tangency where there are black spogonals


Hello I hope to have been helpful

♪

 

[RS4]

I also attach the iges model with surface and curves


Hi.

♪

 

[AC Design]

Hi.
You were very kind. . I'm just coming home. .

I'll let you know!

Thank you.

 

[AC Design]

I also attach the iges model with surface and curves


Hi.

♪

The model is perfect... I made some small adjustments and I finished building the ring....I was really helpful! !

Thanks mielle... sometimes it is not said that the perfection of the single surface is not resolved even with a patch puzzle!

alessandro

 

[RS4]

I am pleased to have been of help

My method was to create so many tangent pacths between them and then I closed them in a single surface of union

to the prox


♪

 

[RS4]

excuse alessandro

if it wasn't a mistake it was a true ring with the shape

Hi.

 

[AC Design]

Yes, a tiupo ring a model of Bulgarians, but different in the top. . .