physical properties update

[Tarkus]

Hello, everyone.
I set "upon physical properties during rescue" for parts and assemblies in: application->general-> physical properties.
If I take the property and then save, the rescue brings me the mass to n/a.
how to do why it remains updated after rescues?
no use changing settings in "upon physical properties during rescue".
always behaves the same.... .

 

[Matteo Cappelli dis.CAD]

Hi.
to me it works, after saving the mass is updated; Do you have a suitable part/axis?

 

[Tarkus]

Hi.
to me it works, after saving the mass is updated; Do you have a suitable part/axis?

No, he does it on normal parts without activity.
and I did it with 2017 and 2018.
I don't want it to be a setup that I've been taking for a long time. .

 

[stefanobruno]

No, he does it on normal parts without activity.

idem, it's a very annoying thing.

 

[exxon]

I also confirm: I made a habit of it.

 

[Tarkus]

ah, I understand, it's the "it worked better when it worked worse."...

 

[Zac69]

voice outside the choir: same setting and updates everything, including the automatic weight on the cartouche of parts and assemblies.

 

[exxon]

program version? I know?

 

[Zac69]

program version? I know?

all versions on vin7

 

[exxon]

I have the problem on win8.1 with pro2016, previously I do not remember.
@zac69
win7 32 o 64 bit?

 

[Zac69]

I have the problem on win8.1 with pro2016, previously I do not remember.
@zac69
win7 32 o 64 bit?

at least grant me 64 bits... :

 

[exxon]

I was indecisive if to ask, but equally intrigued by the fact that you work all versions.
It seems there is no common denominator. . .

 

[Zac69]

Write an ilogic rule on ipt and iam templates and run it in the two "before saving" event triggers and/or "change any model parameter".

mass = iproperties.mass

 

[exxon]

Let me understand: does it work to you because you entered this rule?
if so you can consider it a patch to solve the problem.

 

[reb_bl]

Write an ilogic rule on ipt and iam templates and run it in the two "before saving" event triggers and/or "change any model parameter".

mass = iproperties.mass

I have the same setting, not on template though, directly from triggers part/assieme, so I leave the tamplate "clean".
I had to remove "modification of any model parameter" otherwise when I modified a quota it would start the refresh, annoying.

 

[Tarkus]

voice outside the choir: same setting and updates everything, including the automatic weight on the cartouche of parts and assemblies.

Yes, but it is not possible that it is a random option.
There must also be a setting that makes it work or not:

 

[Zac69]

Let me understand: does it work to you because you entered this rule?
if so you can consider it a patch to solve the problem.

no, I have the options and it works properly. I tried to remove from the options the rescue of the mass and improvise the rule and it works. then I removed the rule and put the check in the options as it should be.

 

[exxon]

and then remains one of the black points of the program.. .