play objects

[m_arquati]

Bye to all,

Is the need to reproduce objects that lack the drawings (both 2d and 3d)... now, the caliber I have and I can read, but how to know the rays of the fittings, the sforms, the angles between any faces not parallel?
Is there a tool or does it take a "method"?

How would you do that?


Thank you so much!
Hi.

 

[bisogna_rimanere_umili]

Maybe I say a fissure.. .
profile projector?

or otherwise turn to the famous common sense or to someone who has + experience.. .

 

[Fulvio Romano]

depends on the precision you need.. .
for a complete reverse engineering there are scanners, there are tastators (such as beacon arms, goddesses). but they collect a cloud of points = so many data to be placed in order.

I don't know, it depends on what you have to do, how often you have to do it, and how precisely

 

[lollo3d]

for the rays there is a tool (of which I miss the name) similar to the spectrometer or the book counter, which serves to measure the rays.
for the rest there is mastercard... .
apart from the jokes, it depends on the complexity of the pieces to be detected and, if some faces are not necessary, you can take certain measures and others for points. then join them.

 

[michelangelo]

the instrument quoted by lollo3d is the raymeter. . .

 

[Mario SJPD]

here's how it was called, but usually the rays do not have all this importance....if you only need to draw it to detect its shape and important...if you also have to quote it and better know where it is placed and with what it mates (you know the tolerances sometimes are important and....you can not measure it) besides the operation and the material....if then you have to produce it then change all the measures you will have detected will be good than a starting point that easily