mimanica
Guest
hi to everyone, I would need a post mazak 4 or 5 axes, or alternatively turn a post fanuc 4 axes.
Thank you.
Thank you.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
MFT
Guest
Sure that as a first post without a presentation, we immediately disappear with the heavy artillery........ .hi to everyone, I would need a post mazak 4 or 5 axes, or alternatively turn a post fanuc 4 axes.
Thank you.
But some people think we're here working for them, I wanted not to answer (also because you don't deserve it) but I couldn't hold back.
Also recorded today....wowowowow
mimanica
Guest
I apologize for the brutality, I actually proposed myself with arrogance. I'm not usually like this, and I'm sorry to everyone.
I have been in the mechanical field for over 20 years, and I use the cam (mastercam) for at least 15 years with some breaks of a few years in which I worked as a designer with acad (thing common to many), me10, solid edge but above all inventor (from 5.1 onwards). before using the cam I planned on board the car in iso (fanuc ) and heidenhain. I had a period in which I was the owner of a company with 3 vertical centers 1 horizontal and a cnc lathe, (fanuc controls, mitsubishi and okuma ). Now I'm working in a company that has practically all the mazak machines I've never seen.
I would like to start creating some mastercam+mazac program and then switch to using their cam that is edgecam.
I have a lot of experience especially in the organization of work and machine tooling and apart from post-processor modification I can tell my about the use of mastercam and inventor.
I hope that this presentation is enough for me to apologize (I hammered almost all my life ) and in other posts to be of help.
ciao
I have been in the mechanical field for over 20 years, and I use the cam (mastercam) for at least 15 years with some breaks of a few years in which I worked as a designer with acad (thing common to many), me10, solid edge but above all inventor (from 5.1 onwards). before using the cam I planned on board the car in iso (fanuc ) and heidenhain. I had a period in which I was the owner of a company with 3 vertical centers 1 horizontal and a cnc lathe, (fanuc controls, mitsubishi and okuma ). Now I'm working in a company that has practically all the mazak machines I've never seen.
I would like to start creating some mastercam+mazac program and then switch to using their cam that is edgecam.
I have a lot of experience especially in the organization of work and machine tooling and apart from post-processor modification I can tell my about the use of mastercam and inventor.
I hope that this presentation is enough for me to apologize (I hammered almost all my life ) and in other posts to be of help.
ciao
MFT
Guest
And more than enough, I'm sorry that for your problem you can't help. as you will already know if I am not mistaken mazak has as control has the mazatrol which is particular for which I wish you to find what you need.
Mar
Mar
mimanica
Guest
Hello, the mazatrol is one, but you can program it also in iso.......
lorenzomugnai
Guest
hi to everyone, I would have the solution to your drama, but since I live with the sale of custom post processors, contact me if you want a quote. Lorenzo