bomber93
Guest
hello to all I am a 5iti mechanics student my name is Mario and I recently approached the design with solid edge :smile:
CiccioViol
Guest
Bye to all,
My name is francesco and I am an aerospace engineer, but I work in the railway sector.
use catia v5, autocad for design and patran/nastran for stress analysis.
My name is francesco and I am an aerospace engineer, but I work in the railway sector.
use catia v5, autocad for design and patran/nastran for stress analysis.
interminelli
Guest
Bye to all,
are the first weapons with solid edge st4.
I take care of thermal insulation and hope to improve through the forum.
Thank you.
are the first weapons with solid edge st4.
I take care of thermal insulation and hope to improve through the forum.
Thank you.
pestain
Guest
Greetings to all.
My name is Giuseppe, I'm an aeronautical engineer and a torino dress. I have been engaged for about 15 years in the field of mechanical design, from first in the aerospace field, where in space alenia I was involved in the design of modules for the international space station. I've been driving for 11 years, and I've been designing engines. software that I use for modeling are mainly pro/e and ug.
I joined this forum however for a whole other reason, I was interested in the computer and I wanted to try to learn how to use 3ds max.
greetings
pepstain
My name is Giuseppe, I'm an aeronautical engineer and a torino dress. I have been engaged for about 15 years in the field of mechanical design, from first in the aerospace field, where in space alenia I was involved in the design of modules for the international space station. I've been driving for 11 years, and I've been designing engines. software that I use for modeling are mainly pro/e and ug.
I joined this forum however for a whole other reason, I was interested in the computer and I wanted to try to learn how to use 3ds max.
greetings
pepstain
Ramazza
Guest
Good morning to all,
My name is ivan, I am an electronic expert who has started to approach the world of solid edge for 2 years, work in the automotive sector.
I enrolled because I would like to compare with other people who have my own passion for design 3d.
again a greeting to all
ivan
My name is ivan, I am an electronic expert who has started to approach the world of solid edge for 2 years, work in the automotive sector.
I enrolled because I would like to compare with other people who have my own passion for design 3d.
again a greeting to all
ivan
casadeimatty
Guest
Good morning, my name is morning and I'm a new member.
are mechanical ing. and I am responsible for designing systems for handling and automation.
I am currently working with inventor, but I would like to deepen the use of solid edge.
are mechanical ing. and I am responsible for designing systems for handling and automation.
I am currently working with inventor, but I would like to deepen the use of solid edge.
ribuo
Guest
hi to all I am new, I am a student graduating in mechanical engineering, use solid edge for about 3 years and at this time the st4 with which I am making my thesis of graduation! Good job!
amhafeez_1984
Guest
hello to all my name is amar and I am of emilia reggio. from a year and a half use solid edge and work for a company that pruduce wood stoves and pellets.
radio
Guest
welcome to all and good attendance.
amhafeez_1984
Guest
Thank you for your welcome.
mirko_edge
Guest
hello to all, my name is myrko and I write from cesena, I am a fan of cad 3d as well as solidedge and solidworks, unfortunately I have not yet managed to make this passion my work but hope to happen soon. In the meantime, I hope I don't bother asking for some help here and there on the use of programs, obviously after reading the manuals.
Bye!
Bye!
Luca70b16
Guest
good day to all, I call myself luca and I do mechanical design first with
autocad 2007 3d(5 years) and then the last year with solidedge v20.
work as an employee at a small company that produces its finished products. my work is mainly directed to the processing of small sheets (up to 10 mm), from the design, placed at the table to the development up to the dxf. jump the passage of the laser and control bending and welding of the samples.my work ends at the production of the finished project, save revisions.
I've been following this forum for a few months and I find it very interesting and in-depth, especially because it seemed to me that I realized that knowing and solving problems related to the various software goes beyond the professional interest.
Congratulations. . .
I hope in a future exchange of mutual knowledge.
Hi.
autocad 2007 3d(5 years) and then the last year with solidedge v20.
work as an employee at a small company that produces its finished products. my work is mainly directed to the processing of small sheets (up to 10 mm), from the design, placed at the table to the development up to the dxf. jump the passage of the laser and control bending and welding of the samples.my work ends at the production of the finished project, save revisions.
I've been following this forum for a few months and I find it very interesting and in-depth, especially because it seemed to me that I realized that knowing and solving problems related to the various software goes beyond the professional interest.
Congratulations. . .
I hope in a future exchange of mutual knowledge.
Hi.
Be_on_edge
Guest
amen
Guest
I don't know if I showed up or not. cmq:
I have done an annual course with solidworks and I have worked a little more than a year, metalworking industry, now 2 use solidedge, always in the field, so many times I regret the works...
Greetings to all:biggrin:
I have done an annual course with solidworks and I have worked a little more than a year, metalworking industry, now 2 use solidedge, always in the field, so many times I regret the works...
Greetings to all:biggrin:
GINOPILOTINO
Guest
Hi.
are bari and work at a company of naming (mechanical sector)... use solid edge st4
Hello!
are bari and work at a company of naming (mechanical sector)... use solid edge st4
Hello!
alphabeta
Guest
Bye to all,
I'm ancon and I'm dating the second year of mechanical engineering. in this semester I have a design course with solid edge for this I joined the forum :wink:
I'm ancon and I'm dating the second year of mechanical engineering. in this semester I have a design course with solid edge for this I joined the forum :wink:
Musical76
Guest
Bye to all,
I am mechanical expert and for years I have been working in the field of design with plastics..I used autocad for many years...I went to pro-e, I worked a lot with nx and now use solid edge.. I developed products for biomedical, automotive, and now mechatronics for automation. happy to participate in the forum and be able to share my experiences.
I am mechanical expert and for years I have been working in the field of design with plastics..I used autocad for many years...I went to pro-e, I worked a lot with nx and now use solid edge.. I developed products for biomedical, automotive, and now mechatronics for automation. happy to participate in the forum and be able to share my experiences.
resentin
Guest
hello to all are treviso
for some years I use solid edge (from v18 ) for
modeling of carpentry surfaces varies and a little piping
in the past I used autocad (and a little solidworks )
a greeting to all
for some years I use solid edge (from v18 ) for
modeling of carpentry surfaces varies and a little piping
in the past I used autocad (and a little solidworks )
a greeting to all
cacciatorino
Guest
a warm greeting to all newcomers!
we hope that the stay of the forum is useful and pleasant! :smile:
we hope that the stay of the forum is useful and pleasant! :smile:
Huntor
Guest
Hello everyone!
My name is Lorenzo and I come from the province of macerata. I attend the mechanical engineering course in the Polytechnic University of brands. I opted for the computer-assisted design and programs that make us use are solid edge st4 and rhinoceros.
My name is Lorenzo and I come from the province of macerata. I attend the mechanical engineering course in the Polytechnic University of brands. I opted for the computer-assisted design and programs that make us use are solid edge st4 and rhinoceros.