• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

presentation

  • Thread starter Thread starter Sandra_ME30
  • Start date Start date
Hello colleagues, my name is francesco and I am a first year mechanical engineering student at the University of palermo. I've been in contact with autocad since I was a kid since my father was a gemetra. I had the opportunity to better appreciate the subject with the computer-assisted drawing material. I have written to deepen my knowledge even more since, for an engineer nowadays, a good mastery of this powerful instrument is fundamental. :cool:
 
Hello everyone, my name is vincenzo and I am a thesis of the three-year degree program at the Turin Polytechnic. cad software used at my faculty are in particular solidworks and autocad, I have some knowledge of solid edge and pro engineering software but are not of my use "quotidian". I have been reading your forum for a while and I find it very interesting and educational at the educational and working level. for this I decided to enroll hoping to help someone and find clarity if I have doubts about my work. thanks for your support
 
Good morning.

the forum I've been following him for a while and I'm also recorded by a little bit.
moderators will certainly be able to trace back to dates and historians.
However I am a graduate in mechanical engineering vo. I focused on precision mechanics as a cnc operator and partly as a designer. Now I'm taking over the designer's veins. So I've got to get some practice back.
you see on this forum.
greetings
cold
 
greetings to the forum
a greeting to the forum and always a pleasure to visit it and constitutes an important tool to update and also improve our knowledge.
 
vi "presento" radio ::smile: the moderator of this section.

welcome and good work!!! :smile:
 
Hello everyone, I am a mechanical engineering student, taking a machine construction examination (:smile:) and computer-assisted production (:eek:)
 
Hello, everyone!
I am a student graduating in mechanical engineering at the Milan Polytechnic, at the moment I am preparing the thesis regarding the design of a semi-finished equipment.
I am sure to find great tips in this forum!
thanks to all in advance:finger:
 
Hello everyone, I signed up yesterday but for matters of time I only present myself today.. My name is alessio I am a 3rd year mechanics student at the university of modena. so far we have seen only from great theory therefore with software, modeling etc. I had little to do but now that I went to work in an internal project on a gerotor pump I finally can see something "real"! so I was doing a web search to solve a problem and I happened here! I have to say that it is really a nice forum, I think that in my stay I will find so many useful and interesting things and why not maybe over time I will be able to give a hand :) among other things my problem I have posted it in the 3d model section, whoever wants to give me a hand is welcome! :
 
Hello.
I am a mechanical engineer to the feder ii of napoli at the first year of the magisterium. I wanted to deepen my knowledge in the field of design, since I use almost exclusively solidworks, and try to learn something from the best ones and/or with more experience.
greetings
alessandro
 
My name is luca and I'm a student working in mechanical engineering.

for my thesis work I am using:
ansys v12.1 for fem;
pro-e 5.0 and nx 7.5 for cad.
I also used cfdesign2010 for cfd

good work to all!!! ! !
 
welcome to both, I assure you that here you will find stimuli and insights to dry! :smile:
If you have any constancy in the attendance, you will find out how much your technical cultural baggage can be enriched.
Greetings.
 
hello to all, I am a first-year mechanical engineering student, with passion for motors and car design :), I don't have much knowledge cad but I have performed by self-taught work on autodesk, I don't know what the difference is but it's still a very complex program, even professional in the field. I enrolled because my dream is to design and be able to have advice from those who know more about me is the maximum. :

jasmine.
 
Welcome!
Fortunately, sometimes, this community of boys is honored by the presence of an exponent of the other half of the sky. :finger:
 
Greetings to everyone, my name is alessandro, a second year student of mechanical engineering to the polytechnic of ancona, I frequent the course of cad for a few months (we use solid edge and rhinoceros) and I have begun the design of a kart for the examination project and I hope to find any necessary help to undertake this adventure.

Given that I have always been passionate about mechanics (thanks to my father), I have always been a very ingenious type since I was a child and the design aspect has always impressed me and that is why I am very pleased to learn the use of certain cad programs and I don't weigh at all (unlike other my companions who see it as a difficult and boring examination, almost "unnecessary" :confused: )

Surely I was very impressed by the words of my professor: "when I graduated, I knew how to use a computer design program was an extra march for the curriculum of a young mechanical engineer, today we say that if you do not have the requirements it is almost a lack, a point to unfavor.. . ":finger:
 
hello to all, I am a mechanical engineering shrew at wisdom at the third year, I am sure I will find myself well and my gaps will certainly be filled
 
hi, my name is max (American father, American name).

I am a mechanical engineer who has just graduated and worked at the optimization study through genetic algorithms.

I know very little, but now I have to know how to use it because I am doing a job that has nothing to do with what I usually do.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top