presentation

[meccanicamg]

Hello my name is rich zocchi I am a mechatronics very little pleasure to all

benvenuto sul forum?

 

[riccardo432532423]

I humbly ask for help for this exercise?
a disc joint connects the shaft of a drive machine that develops the power of 40 kw with the shaft of an operating machine whose time resistant, at regime, is 700 nm. 1) size the shaft; 2) Execute the sizing of the connection bolts of the joint disks; I don't know how to do this with these starting data

 

[meccanicamg]

I humbly ask for help for this exercise?
a disc joint connects the shaft of a drive machine that develops the power of 40 kw with the shaft of an operating machine whose time resistant, at regime, is 700 nm. 1) size the shaft; 2) Execute the sizing of the connection bolts of the joint disks;

should not be posted in the presentation.
should be posted in the student section by opening a new post by clicking on create discussion.

 

[cacciatorino]

Hello my name is rich zocchi I am a mechatronics very little pleasure to all

Welcome, but next time you remember to put the commas, otherwise you don't understand if you're a very poor mechatronic or if we're antipathic already

 

[meccanicamg]

Welcome, but next time you remember to put the commas, otherwise you don't understand if you're a very poor mechatronic or if we're antipathic already

hunters or, can you please move the post of the rich young man to the right place so we answer him?

 

[PIETRO2002]

Welcome, but next time you remember to put the commas, otherwise you don't understand if you're a very poor mechatronic or if we're antipathic already

Yeah! commas look like a cabbage, but they can change the way to a phrase.. and then it becomes a mess

 

[Gabbro01]

hello to all, my name is gabriele and I attend the last year at the tether'sitis, mechatronic mechanical section.
in these years I used autocad and inventor

 

[meccanicamg]

hello to all, my name is gabriele and I attend the last year at the tether'sitis, mechatronic mechanical section.
in these years I used autocad and inventor

Welcome

 

[Gabriele17]

Hello everyone, my name is gabriele and I attend the first year of mechanical engineering, coming from science, in addition to mathematics and physics, I am facing topics never dealt so far, which are making me more and more passionate about the field I hope to be part of a day. I would like to work in the world of motorsport as an engineer, for now I remain humble and I dedicate myself to the first exams. I am learning to use freecad software by self-taught, very nice I have to say. greetings to all

 

[VRDPP]

Hello everyone, my name is mychele I am a mechatronic pleasure to all

 

[Gigi_75]

hi are gigi and I deal with software, 3d, rendering, documentation, pdm, plm, cam, pleasure to all.

 

[LeoZ01]

Hello everyone my name is leonardo
I attend the technical institute (called once itis), course of mechanics and gallarate mechatronics.
I'm at the last year, so I'm struggling with maturity at the moment.
I would like to enroll in mechanical naiveries at the Milan pole.

I often use inventor, more rarely autocad2d and fusion.
I have no real working experiences, just some internships where I used the software mentioned and performed various tasks.
I am sometimes delighted to make some experiment of forging and working hot metal, just to remain in the technological issue.

 

[Scipione205]

Hello, guys.
I'd like to introduce myself to everyone. It is usually good to do so (and even required by the regulation) in the forums.
I studied electronics and telecommunications, air navigation, and then aerospace engineering. I worked as an electrician in events and shows, industrial and energy plants; I worked in the aerospace in the brokerage of components, cams and work centers. I am currently an electrician of film sets and also researcher at a research and training centre.

after I arrived on this forum doing research, I decided to participate actively.

a hug to all

I had already introduced myself Here

 

[salvia]

Hello everyone, I am a mechanical engineering student at the University of Salerno Studies. I am often struggling with various projects so I hope you can help me when I need it obviously I hope to be useful to someone if there is a chance!

 

[allestrato]

hello to everyone, my name is an alessandro I am an engineering student of automation in bologna. I discovered this site years ago through research on design and hope to be able to actively contribute sooner or later.

 

[Sisina]

Hello everyone,
My name is a teresa maria and I am a student of mechanical engineering at the bari polytechnic.
I can use autocad from the middle and I learned to use it better at the institute for geometries. I just started using inventor.
compliments for the forum!

 

[Errico24]

Bye to all,
I'm a mechanical engineering student at the napoli university. I am currently following the third year of the three-year term. as software I can use autocad and solidworks (although for the latter I still have to exploit all the functions). I have been reading the discussions on this forum for a long time, and since for the first time I should also ask for something, it seemed good education to introduce me.
I take advantage of this opportunity to wish you a good year.

 

[Lucaallegrini]

after reading this:small settlementYou can present yourself!
(from which part of the world you come, what kind of school you attend, if you have also working experiences, the cads you are learning.... )

Welcome!

Good evening to all,
I am a student of mechanical engineering; before embarking on the academic path and just finished high school I worked in a body shop as a preparatory coach.
I'm learning to use solidworks and ansys software.

 

[Binglin]

Hi, my name is binglin, I'm from the cina and I'm a student of aerospace engineering. I'm fighting for the first time with technical design and solidworks.

 

[Capstan10]

hello to all colleagues and future such!
I'm going, mechanical engineering student.

eager to learn everything orbiting mechanics and above all to learn cad and fem analysis!