problem displaying pre-cut hole

[Sundip96]

Hello, guys, I'll explain my problem:
when I put on the table a design with inventor 2013 presenting threaded holes there is a problem to the press: when molding the design the thin line of threading and the pre-cutting line are coincident (I also tried to put as a switch for the fine line s=0.10 mm)
Thanks, guys!View attachment img.bmp

 

[stefanobruno]

toolbar --> document settings --> modeling board --> threaded hole diameter --> less

 

[Sundip96]

thank you very much but it is already set to minor.
- - - updated - - - -Any other ideas?

 

[Sundip96]

Can anyone help me?

 

[stefanobruno]

Can anyone help me?

attach your file, both ipt and idw.

 

[Sundip96]

Here! I hope to solve the problem

 

[stefanobruno]

Here! I hope to solve the problem

You know how to pack?

 

[Sundip96]

I'm sorry.

 

[Sundip96]

problem: I can't load them because they weigh more than 2 mb (if I don't send them on skype)

 

[Sundip96]

te li invia su skype

You know how to pack?

 

[stefanobruno]

te li invia su skype

It's okay, but by doing the solution to your problem, you don't need other users in the forum, as well as don't involve other people who could help you with more skill and speed.
Anyway, the zip you sent me got corrupt.
also attach a pdf where you signal what you consider to be the problem.
I opened your idw and the threads I see represented correctly.

Bye.

 

[Ilario]

judging by the image it seems that it is not a problem, the fact is that having put even the bolt, it is represented correctly with the big external lines, in fact if you see beyond the bolt the lines are right. . .