problem stair scales of annotative objects

[SANKELLO]

good morning to all, I am cad user for years, I have version lt2016
I decided to remake the whole design system to create a new prototype file with legends, odds and multidirectors.
to do this I created annotative objects, but the problem in which I run is the management of the stairs.. .
then, I design on architectural expressed in centimeters (a bald of scales measures 30 to understand us)
when I created the annotative director, I told him that the text must be high 20 (when mold I would like it to be high 2mm on layout)
How dare I set the stairs between drawing and blocks? I have seen that you have to create custom scales card unit = design unit
the layouts I use are 1:50/100/200.. .
Sorry maybe the question is trivial, but I'm going out crazy....
Thank you.

 

[Tristan]

...I design on architectural expressed in centimeters[...]How dare I set the stairs between drawing and blocks? I have seen that you have to create custom scales card unit = design unit
the layouts I use are 1:50/100/200.. .

1:5
1:10
1:20...

 

[Superpippo33]

if I didn't get it wrong: the scales you use are 1/50, 1/100 and 1/200, which are usually preset by default with the corresponding parameters:
1/50 card unit = 1 - design unit = 50 ==> to every 50 cm, or other unit, will correspond one cm, or other unit, in the layout / on the sheet
1/100 card unit = 1 - design unit = 100 ==> to every 100 cm, or other unit, will correspond one cm, or other unit, in the layout / sheet
1/200 card unit = 1 - design unit = 200 ==> to every 200 cm, or other unit, will correspond one cm, or other unit, in the layout / sheet
you can already find them in the list of preset scales, and lend themselves to the design in centimeters that should be read in meters on the card.
for the text: just set height = 0.00 in the respective style and assign it the desired size for output: 0.20 for 2 mm, 0,30 for 3 mm.

to me it works smoothly.
Let me know the outcome.

 

[lattu]

I reconnect to this tread, how do you behave with the ladders of the dotted lines?

 

[Tristan]

I reconnect to this tread, how do you behave with the ladders of the dotted lines?

everything depends on the .lin definition file; But maybe I didn't understand the question... .

 

[Lattu2]

I'm lattu...
in the sense that I struggle to set a file with the annotative objects with the relative scales and manage the dotted lines. work in cm and use mainly scales 1:50 / 20 / 10 / 5

 

[Tristan]

We start from the beginning. Can you interpret a definition file of autocad lines (*.lin)?

 

[x11start]

from what I know there are 3 variables that manage the scale of the restraints:

ltscale : defines the "global" value of the dotted line scale (default 1)

celtscale : represents the scale value of the single line. e.g. if the global value is 1 all "hidden" lines will have the defined step in the *.lin file, but you can "force" a specific line to have a different step (e.g. 2) and then that (to only that!) will have a different step.

psltscale: indicates the behaviour of the lines in the paper space; therefore if they behave as in the model space or if they adapt to the scale of the single window of the paper space.

.... correct me if I'm wrong!

ps. I also find a lot of difficulty with the lines outlined... and I always regret the method used by me10!

 

[lattu]

We start from the beginning. Can you interpret a definition file of autocad lines (*.lin)?

more or less, I remember that there are the values of the length of the strokes, the spaces and any custom forms to be loaded apart

 

[lattu]

from what I know there are 3 variables that manage the scale of the restraints:

ltscale : defines the "global" value of the dotted line scale (default 1)

celtscale : represents the scale value of the single line. e.g. if the global value is 1 all "hidden" lines will have the defined step in the *.lin file, but you can "force" a specific line to have a different step (e.g. 2) and then that (to only that!) will have a different step.

psltscale: indicates the behaviour of the lines in the paper space; therefore if they behave as in the model space or if they adapt to the scale of the single window of the paper space.

.... correct me if I'm wrong!

ps. I also find a lot of difficulty with the lines outlined... and I always regret the method used by me10!

exact, but the problem is that if I impose the psltscale I don't find a value that goes well (from 0.00000001 to 10000000) if I disable it I see the lines too firm in the model and too thick in the paper space

 

[x11start]

I have always suspected that in autocad there could be a 4th variable "occulta" ... a little as happens in astrophysics for the "dark matter", of which the effects are seen but there is no certain evidence of its existence!
Other jokes, I am referring to the fact that I happened to open or import a design and find lines dotted with a certain step, try to make a new one (with the same values of psltscale, celtscale and typelinea)... and note that the line just drawn is not equal. the only way to make it equal, is to do the command "copy properties". Unfortunately, I don't have a dwg to try when I say... but from here comes my "astral-philosophical" hypothesis on dark matter!

 

[Tristan]

I have always suspected that in autocad there could be a 4th variable "occulta"

in fact... there is msltscale
I'll send you back to my old blog post, I hope you can help

MSLTSCALE e PSLTSCALE

Con AutoCAD 2008 Autodesk ha introdotto le scale di annotazione, ovvero quel semplice meccanismo che permette la scalatura automatica di ta...

ctrl-alt-cad.blogspot.com

 

[dieva]

attention to the variable measurement and a discordance between the unit system in use and that stored in the design.

during installation the cad establishes whether to use the metric or imperial system. for each of these unit systems exist corresponding dashboard definition files ( .pat file) and type ( .lin file). for example acad.lin and acadiso.linthe variable measurement indicates whether the current design uses the imperial system (value 0) or metric (value 1).

it can also be that the types have been imported into the current design by drawings with different measurement.... therefore their definition refers to the info present at its time in acadiso.lin while now you are using acad.lin (or vice versa).

try to change measurement value and recreate objects.

 

[x11start]

Thank you so much! between measurement and msltscale I will have a way to do tests.... and solve once and for all the ark!
Have a good day.

 

[lattu]

I tried to change the suggested parameters but apparently nothing had been resolved, then after the Enthronement _Regenall I still managed to solve, so something will happen and thank you.