problema con assembly features

[vapo]

Hello everyone,

my problem is related to the use of assembly features in product environment.

we say that I have my nice product made up of various sub-assemblaty and parts. at the assembly level I want to make a drill that goes to interest some of the components of my assembled. the question is as follows: Is it possible to ensure that my drilling operation (executed with assembly features) is not repercussions on the catpart files of the components, but that it is visible only to the inside of the catproduct (e.g. what happens in proe)?

thanks in advance for your support.


________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

 

[fenice consulenze]

at the assembly level I want to make a drill that goes to interest some of the components of my assembled.

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

excuse me vapo, but what sense does it make a hole on a set and not on the individual parts that involve it?
When you have to physically produce individual pieces, things will never come back.
what I recommend to you and to make an agni part the hole and then on the assembly see its behavior

 

[ferrezio]

typical pro-e user request, when dealing with rework on welded details.
However, the answer is no.
the features of catia together reside on the part, on pro-e in the axieme.
to obtain a similar result you must poison the associated perte (menu transformations).
created this tool rework is done on the associated part which is derived from a set of parts.

Hi.

 

[falonef]

Since the r19 there is the possibility of drilling for example in assembly and making sure that mechanical processing does not repergulate in the catpart.

typical example mounting holes to be created at the time of assembly.
cv5 directly creates new bodies with links in the logical tree of the assembly.

It's up to you to handle this.

It's a bit + proe but it works from r19.

 

[vapo]

in fact, thanks ferrezio falonef, or own need to make holes on a assembled, having as reference a reference of assembly.

thanks again for your interest. where I work the passage to 19 should not be too far. I'll wait to see how it works.

thanks also to fenice consultations.

greetings and good year.

 

[falonef]

Because I'm a little stubborn I checked again. the function is available from the r18