You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Pulici68
Guest
Are those holes a series? I suggest you optimize with manual insertion of library parts linked to a series. problem that I had I do not remember where for holes with not completely bound constraints. then from the image you do not understand well.
pulleys
pulleys
SimoneCRV
Guest
It is simply a beam and two platelets attached to the ends.Are those holes a series? I suggest you optimize with manual insertion of library parts linked to a series. problem that I had I do not remember where for holes with not completely bound constraints. then from the image you do not understand well.
pulleys
from the tests I made, with holes executed with the drilling function, with the cutting function, or directly in the sketch, the result is always the same.
He can recognize me as a single plate, the other one doesn't feel it as a "fine bolt" and therefore doesn't place anything.
sin, because it could be an interesting function smart fasteners, but I had to abandon them.
teseo
Guest
to me work once you and 10 no, the last time selecting a hole placed me 4 screws in series........ automatisms according to me are beautiful but unfortunately only work in particular situations....It is simply a beam and two platelets attached to the ends.
from the tests I made, with holes executed with the drilling function, with the cutting function, or directly in the sketch, the result is always the same.
He can recognize me as a single plate, the other one doesn't feel it as a "fine bolt" and therefore doesn't place anything.
sin, because it could be an interesting function smart fasteners, but I had to abandon them.
Pulici68
Guest
I sincerely have been sincerely 32 years of experience these are those problems that piss you off, but the solution is difficult. Maybe some sw or video card files are corrupted, I hope you use a picture at least, because I cease and tell you not once I reinstall everything, but I say formatting c and reinstalling in this order: win 10, delete all belin apps, stop all notifications, in short free + ram possible that never enough. then install acrobat reader, office, if you use sw after 2021 or that, better if the 365 or 2021 which is gorgeous, out of googolandia, do not install google chrome absolutely, firefox or work, then install your beautiful sw, do not copy the custom settings from the previous uninstalled but remake the deck and put them back to place. I don't say it always worked, I have the average about the problems you can't explain 50 to 50. Of course it's a pain in the ass. of + I can not say.
drivers of the sche video picture are the ones recommended for your version of sw. quarda on the site and never update them. Trust me.
Good luck and make the wolf.
bhè mal che go clean your computer, I since I have industrial quantity of beta versions
formatted and reinstall the clean hard disk image every 3/4 months.
If you do it yourself, even if you have to lose us at least 3/4 days earn us something.
cleaning
drivers of the sche video picture are the ones recommended for your version of sw. quarda on the site and never update them. Trust me.
Good luck and make the wolf.
bhè mal che go clean your computer, I since I have industrial quantity of beta versions
formatted and reinstall the clean hard disk image every 3/4 months.
If you do it yourself, even if you have to lose us at least 3/4 days earn us something.
cleaning
Forum statistics
ciao