maurice72
Guest
Hello, everyone, I should schedule a milling machine with cnc fidia m2 , not knowing this control I wanted to ask you if someone has any manual to pass me, thank you .email leon307@virgilio.it
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
bulinorotto
Guest
maybe if you feel straight fidia do first,maybe they have electronic manuals
maurice72
Guest
hi, maybe I call them but if they ask me serial numbers of cnc and things like this, as I think they will, I am not able to provide these info; I wanted to ask you your opinion on featurecam of delcam ...
bulinorotto
Guest
I have part 2d of milling and I am sincerely satisfied, my partner has a full version for a multi task lathe. The thing that jumps immediately to the eye of featurecam is the programming time is impressive!hi, maybe I call them but if they ask me serial numbers of cnc and things like this, as I think they will, I am not able to provide these info; I wanted to ask you your opinion on featurecam of delcam ...
on part 3d there is its module but having already another home I prefer to arrange otherwise
the budget is positive to set up the post for a fresa is relatively simple for the fresa lathe it took a little + also because for us it was the first machine of that type and none of us had experience.
every time there was a problem I had to call assistance from the manufacturer of the machine, let me explain where I was wrong and then send the email with the changes to those of delcam.
in any case as already said I am happy with the choice