protect your work

[domy04]

Good evening to you
I have to send births to a client, directly in .prt, but I would like to eliminate all the parameters that with sweat and scratches I put up, there is a way, do you have any ideas? Thank you.

 

[Lorenzo77]

hi, if I have to delete the chronicle of the part I go in the navigator part and change from "chronistoria mode" to "modality without chronomy" and finally return to "chronistoria mode". so doing loses all the chronicle of the part but first remember to save the part with another name.

 

[IPdesign]

Well there are various ways, if it is a file only you can do a remove parameter
if it is a very full-bodied set you can export in step and then reimport

but at this point one wonders whether the customer does not need the parameter, given his request

 

[ceschi1959]

The question is bored.
the compensation you asked includes also parameterization? some customers do not give weight to these things, others feel too 'legated', and for each modification they have to cum. . .

 

[domy04]

Well there are various ways, if it is a file only you can do a remove parameter
if it is a very full-bodied set you can export in step and then reimport

but at this point one wonders whether the customer does not need the parameter, given his request

Since the customer, working with nx needs my set to position the product in its context.
I did two tests.
with parameters removed: seems to work but then in the expression list there are still all strings
with chronic mode: expression strings are not removed and therefore not useful to my use.
maybe saving in step remains the best solution for now

 

[stef_design]

make a step and it matters. No?

 

[beppino]

Since the customer, working with nx needs my set to position the product in its context.
I did two tests.
with parameters removed: seems to work but then in the expression list there are still all strings
with chronic mode: expression strings are not removed and therefore not useful to my use.
maybe saving in step remains the best solution for now

export to parasolid (x_t), or in jt (remembering to include geometry).
in these modes the reimported geometry is better than the step.

 

[domy04]

Thank you very much