pump to move water + circular tub in lexan

[reggio]

Good evening to all, come back with my strange demands,
ask us to make a tub made of transparent lexan (or other material)
Indicatively imagine taking a ø300mm tube to cut it in 2 and hold only the "culla" below,
now of this half tube we have to get a closed ring, then a straight stroke of about 3mt + curve 180° r=1000+ mt straight return + curve 180° r=1000 to close.
so we get a ring tub.
... we fill with water (made? ... I look like art-attak
put polystyrene clips ø250 in step 300mm with weights above up to 1,5kg cad
...and now I have to turn it all slowly.

now the questions
1) how to choose/calculate the suitable pump?
2) who is able to make a transparent plastic tub of that size?

 

[MBT]

Good evening to all, come back with my strange demands,
ask us to make a tub made of transparent lexan (or other material)
Indicatively imagine taking a ø300mm tube to cut it in 2 and hold only the "culla" below,
now of this half tube we have to get a closed ring, then a straight stroke of about 3mt + curve 180° r=1000+ mt straight return + curve 180° r=1000 to close.
so we get a ring tub.
... we fill with water (made? ... I look like art-attak
put polystyrene clips ø250 in step 300mm with weights above up to 1,5kg cad
...and now I have to turn it all slowly.

now the questions
1) how to choose/calculate the suitable pump?
2) who is able to make a transparent plastic tub of that size?

(1)
bhe, no data. .
at what speed must water turn? according to that you will have your reach
Moreover, where is the pump placed? or are you thinking about a propeller that rotates everything? If you want to use a "classical" pump you will have to make sure that all or part of the water is taken, pumped and shot in the circle.
2) any one that realizes aquariums... or who is familiar with the lexan. even those who make moulds in thermoforming or similar.

 

[reggio]

Hello and thank you

(1)
bhe, no data. .
at what speed must water turn?
according to that you will have your reach

5-10m/minute
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ?

Do they look so many or not?

Moreover, where is the pump placed? If you want to use a "classical" pump you will have to make sure that all or part of the water is taken, pumped and shot in the circle.

no propeller, I thought of a lower by-pass with ø tube (what diameter do you need?) inclined to 30 ° on the horizontal both in and out to make "sweet" the exit and avoid splashes or waves...
but it is necessary that I blow the whole section or just a part of it? ?

from whom can I go to clarify my ideas and have qlc price?
so I also ask for cleaning and filtering. .

2) any one that realizes aquariums... or who is familiar with the lexan. even those who make moulds in thermoforming or similar.

Do you have any name to suggest?

 

[MBT]

5-10m/minute
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ?

Do they look so many or not?

bhe, but you also have half a 300 tube.... it's a beautiful beast

no propeller, I thought of a lower by-pass with ø tube (what diameter do you need?) inclined to 30 ° on the horizontal both in and out to make "sweet" the exit and avoid splashes or waves...
but it is necessary that I blow the whole section or just a part of it? ?

Then just put a part in it, but you will have to go out with a much higher speed.
but here I stop, I have no knowledge to make such a calculation

from whom can I go to clarify my ideas and have qlc price?
so I also ask for cleaning and filtering. .

Do you have any name to suggest?

Um... when I had the aquarium I had found the name of one that made them custom made in plastic material. . .
but now I don't remember and the corporate proxy prevents me from doing research on hobbies.
go from any aquarium store in your area, they usually know how to indicate something useful to you

 

[Giulio Vitali]

a mega greeting to all.. .
...cmq...reggio. Try to counteract the perch of nembro...proves of bergamo. I think he developed. ..made the keel or the blackberry of venetian or red moon... .

Hi.

 

[reggio]

hello to tea and thank you,

the keel or bit of venetian or red moon... .

I think they're on another planet. .