quotation thread left

[davide75]

Hello, guys, today we've come to the company of the following problem.
I have a piece where for design need there are threaded holes with left thread.So model my piece, I make my holes of m12 passers, setting in the dialog box the left thread and until here everything ok.vado to make the table and when I go to quota it with the appropriate command of quotation of threaded holes makes me the quota of m12x1.75 but without indication that the left thread
When I do threaded pins the problem does not arise because the words m12x1.75 - 6g lh appear.
At this point I would like to know if for the holes there is a solution to make sure that when quoting I appear the word dx or sx depending on the thread and the same thing for the quotation of threaded pins.
Any ideas? ?

 

[ninfh]

the settings of the quotas must have been changed if how much use the command for the quotation of threaded holes and appears only "m12x1.75" the standard quotation of inventor would also include the word "- 6g" for example

I personally modified the quotation standard in the same way, because the thread class 99% of the times I don't care

a classless drilling quota appears as the following " <thdcd> " while a quota with the information you request appears so " <thdcd> <thrc> "the voice <thrc> includes missing inormations in your case

solution: 1- double click on the quota
2- press tread class value (this makes appear for example "-6h lh"</thrc></thrc></thdcd></thdcd>

 

[davide75]

and until I was here, but I wanted something to make me appear next to the quota or the written dx or left automatically.I thought that by selecting the type of verse when I make a hole, automatically when I quoto I appear something that makes me understand that the drilling is dx or sx. If the table makes it my colleague who knows nothing about the project quotes the hole and just without posing the problem if it can be dx or sx and the thing can generate errors in the execution of pieces, I don't know s emi are explained.

 

[ninfh]

As I said, so to my nose it would be to say that the quota style for that type of hole has been modified since the initial inventor standard includes the word "lh" in the case of holes with left thread.. .

to change/check the quota style if I don't remember badly it is under styles editor, size, notes and leaders. a votla there is a drop-down menu for the various types of holes and each corresponds to a set quotation standard

if instead it is necessary to replace the note "lh" with "sx" or other.... I have no idea if it is possible, I have never tried