• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

recirculating ball guide

  • Thread starter Thread starter elpado6872
  • Start date Start date

elpado6872

Guest
Hello everyone I am a student of mechanical ing at the university of brescia. I would have a request: I need a recirculation guide of balls with trolley that can be blocked then in the position I need. I ask you therefore if you know of the producers, that if possible they also provide the 3d file for solidworks, which produce this type of guide. Thank you all. Hi.
 
I don't know anyone who produces them with sizes in cm
if you can fit with size in mm, you can try
na
♪
star (devision bosch)
♪

Just googlare a couple of minutes
 
from one post to another has already spread 50 mm... :eek:
from 150 to 200, will the thermal expansion? :confused:

:hahahah:
 
elpado6872 said:
20 cm = 200 mm for those who do not know...
Click to expand...
here also know the stones that 20cm =200 mm, but since engineering studies and we talk about mechanical components, as they have already pointed out mbt and iceman we talk about mm [millimetri] Because if that's the next time I go to the meat store to get sliced I ask him to give me 1,96 n of ham instead of telling him 2 etti... and let's see if she's behind my slicer
 
elpado6872 said:
Hello everyone I am a student of mechanical ing at the university of brescia. I would have a request: I need a recirculation guide of balls with trolley that can be blocked then in the position I need. I ask you therefore if you know of the producers, that if possible they also provide the 3d file for solidworks, which produce this type of guide. Thank you all. Hi.
Click to expand...
Recirculation guide of balls, all are fine but 15 is the size in millimeters wide of the above guide. cart that can be blocked (as?) pneumatically there is the Nexen which are brakes for standard guides.

that I know you do not go beyond 60/80 mm with the models of baricentro trolleys lowered.

check your request that we optimize your search.
 
ok thank you and excuse for the measures in cm I didn't think it was such a serious problem since I escaped because I wrote in a hurry...... for the locking I asked precisely if they exist because without offending my intelligence I will also come to search on google only that if I write here evidently it is because I couldn't find what I was looking for but no problem from now on I will use only google (I refer to this mbt). thanks to everyone hello..
 
ah and thanks to tequila_pilot that has so much time to lose that he managed to answer a question that I did not. .
 
as told by meccbell I also know of troll.

However elpado, if you write as a farmer (with all respect for farmers) it is not my fault or other forum users.

Why do you write about 1 meter long and 15 cm wide. and then after you notice this you also have the presumption of writing 20 cm = 200 mm for those who do not know... You shouldn't even complain if we take you for the bottoms.

on another forum write that studies ing. mechanics but I hope your prof. never hear you speak like this.

greetings
 
ah I didn't think you were going through the offenses on this forum. whistle when you grow up. among other things tequila_pilota I will also be a farmer, but at least I know the difference between weight and mass since I was wrong talking about cm instead of mm, but at least I did not change physical size. But you do me the example of the sausage to which you talk about newton while you want a mass so your example does not exist. weight is in newton mass in kg so avoid making ugly figures. And if a farmer tells you it's really bad.
 
elpado6872 said:
ok thank you and excuse for the measures in cm I didn't think it was such a serious problem since I escaped because I wrote in a hurry...... for the locking I asked precisely if they exist because without offending my intelligence I will also come to search on google only that if I write here evidently it is because I couldn't find what I was looking for but no problem from now on I will use only google (I refer to this mbt). thanks to everyone hello..
Click to expand...
the usefulness of the forum is in giving the answers that on google you cannot find! (and excuse me if it's little...)
on google you can search for the guides you want, the products you like, the technical information you want. unless a forum user treats the product you are looking for, it is obvious that you will not find the catalog here!
I don't know what the guide can be with the features you're looking for, but I know who could do it. and they are "notes" constructors that you can find very well with google, except after opening their sites, download catalogs and check if they have what you need.
When you find it, though, I bet you'll get more questions (you know if it wasn't...) then? What are you gonna do? google in this case will not help you!
 
I have read so many of those crazy things in this discussion. . because a student still does not realize that in mechanics you use mm and not cm, you have made two pages of polemics, accusations that is a troll, but calm down... It was enough to tell him that they use millimeters, point.
It is so important in the forums for the behaviour of the newcomers, but I think it is necessary to check also that of the "Veterans" who often risk running away all. rub your frustrations in another way.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top