Reorders

[PiegatoreSolidworks]

Hi, guys, I was wondering what this command could do. could it be to build a small table on the cartilage that from the bending quotas, angles and everything?

Thank you.


p.s this is what is written on the guide:
http://help.solidworks.com/2011/ita...lp/sldworks/sheet_metal/hidd_bend_reorder.htm

 

[SolidUser]

in a few words the command would be used when you have to convert a piece of Lamiera imported, or when from a classic modeling into solidworks, you want to turn it into sheet metal.
it may happen that a fold you want to move it before another or because the cad did not understand the sequence or the fold should be done on the other side, etc.

 

[PiegatoreSolidworks]

in a few words the command would be used when you have to convert a piece of Lamiera imported, or when from a classic modeling into solidworks, you want to turn it into sheet metal.
it may happen that a fold you want to move it before another or because the cad did not understand the sequence or the fold should be done on the other side, etc.

Thanks for the celery answer. but solidworks does not create a bending table on the cartilage where it indicates the various lines for bending how does solid edge? would be useful!

 

[SolidUser]

in sw creates notes on the flattened view.

 

[andle11]

in sw creates notes on the flattened view.

Does anyone know what kind of notes can be created and how?
The topic also affects me....
Thank you and hello.

 

[SolidUser]

Does anyone know what kind of notes can be created and how?
The topic also affects me....
Thank you and hello.

because you do not read thehelp the premete f1 south command?

 

[andle11]

because you do not read thehelp the premete f1 south command?

the help on the command of the online guide I read it but does not add anything to what I already know. by the way, he says nothing specifically about the command of "reorder bending". also google not from results.. .

 

[SolidUser]

the help on the command of the online guide I read it but does not add anything to what I already know. by the way, he says nothing specifically about the command of "reorder bending". also google not from results.. .

you wrote this:
'Someone knows what kind of notes can be created and how? '
And then you say you already know.

the fold reorder is another command, so it is logical that you will find nothing in the explanation of the sheet notes.

I close and pass the ball to those who understand these interventions.
Luckily, we're technical.

 

[andle11]

you wrote this:
'Someone knows what kind of notes can be created and how? '
And then you say you already know.

the fold reorder is another command, so it is logical that you will find nothing in the explanation of the sheet notes.

I close and pass the ball to those who understand these interventions.
Luckily, we're technical.

Grazie...