revit armor

[luca58]

good afternoon and good year 2024.

I need your help on revit as long as the armor regulates.
my problem and arm the bottom of a circular plate,
I can't fit the circles.
There's no problem with radials.
I tried with "allined and surface" commands but nothing to do
I can't.
Can anyone help me? or indicate some tutorals.
I'll get you a right file to figure out what this is about.
Thank you.

 

[Tristan]

rather than attaching a file, it would be better a screenshot or a pattern where you get out what you want to represent. . .

 

[luca58]

tristan excuse you are right allego screenshot.

 

[Tristan]

Okay, but a drawing of how it should be armed... ?

 

[luca58]

plate armor

 

[luca58]

tub and 32.80m diameter thickness 0.40m
circles must have a length of 6.00m with a overlap of 0.75m

 

[Tristan]

then the circles you have to get them as 6-metre wide discs, as you walk away from the center, overlapping from time to time for 75 cm? I doubt this can be done automatically with freeform bars.

 

[Tristan]

if you realize it as two half plate maybe it is easier; At that point you can use freeform surface bars more correctly. the problem remains the question of overlap

 

[luca58]

thanks for your intervention, I don't hide you that I had intuited to divide the audience into two parts and you gave me confirmation that it is the most suitable procedure.
Of course the problem is about overlap in order to have a distinct truthful needle.
I had thought of modeling a piece of 6.00 meters and with the matrix complete the circumference, but this operation should be done for each diameter.
I have to find a solution to the problem otherwise I am forced to make it with autocad and make the separate hand iron.
It can be solved with dynamo, but I can't use it.

 

[luca58]

Good morning to all of you
I modeled the 6.00m piece and or completed the operation with the matrix command,
so doing I can have the pieces in the separate needles.
other problem I created a label for iron length but I noticed that the value
which inserts is lower than the sum that revit puts in the flexing detail.
Is there a possibility to insert the length of 4450 and not 4395?
Thank you.

 

[luca58]

for the moment I solved the problem of iron length in the label.
Does anyone know how to use dynamo to solve the problem of the seekers?

 

[Tristan]

I know how to use it but it is a very complex problem, especially if you want to solve similar issues with the same script and then manage all the parametric aspect; also because native nodes on the strengthening do not exist, so it would go mostly with python scripts.

 

[luca58]

Thank you for the answer, but I see you enter a field unknown to me.
so with a lot of patience at the moment I will adopt the system I wrote before
"model a piece from 6.00 meters and with the master command complete the circumference"