You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tristan
Guest
If you're at first arms and don't need layering, use in-place walls:wink:
Carlo B
Guest
I just need a layer of plaster inside. What did I do wrong with the Pillar family?
In addition, for the windows, the capitals, the times etc. continue with in place or do I create families apart?
In addition, for the windows, the capitals, the times etc. continue with in place or do I create families apart?
Tristan
Guest
Are you able to create families of capitals and times? If so, do it. I do not see many other alternatives. How long do you have to do the job?
Carlo B
Guest
I don't know how to make capitals, but I ordered the 24-hour manual for that. As for creating families and parameters I looked at several tutorials on the internet and times should not be a problem.
Now my problem is the adaptive architectural pillar. I'll tell you what I've done right now:
I have connected the cad of the planimetries to the foundation level. I have created foundation walls with thicknesses 90cm 85cm 80cm 70cm 60cm 10cm 5cm to be used together with those from 30 and 45 already present in revit.
I created the base perimeter trying to keep less points discovered possible.
then I made new family-- > generic adactive metric model
I set the measuring units in metric . I created a second level that I called "upper level" . After which I created a parameter "high end" using the quota between level 1 and upper level.
I created a rectangle by popping snap 3d and converting the points into "adactive" .I extruded the solid by associating the altiza to the "wine upper part" parameter.
then I went to family type and I selected pillars. loading in the project however going to stick the irregular shape to the wall does not unite me as if they were normal walls. What's wrong?
to make the project I still have 2 months I do not have to realize every single room . but the outside the inner garden and the staircase (an elliptical scale to tense) . if I remain time I would like to model also the inside of a room (the hall of the parties).
I opened the thread to follow me in some passage of the modeling not to ask you every single thing.
Now my problem is the adaptive architectural pillar. I'll tell you what I've done right now:
I have connected the cad of the planimetries to the foundation level. I have created foundation walls with thicknesses 90cm 85cm 80cm 70cm 60cm 10cm 5cm to be used together with those from 30 and 45 already present in revit.
I created the base perimeter trying to keep less points discovered possible.
then I made new family-- > generic adactive metric model
I set the measuring units in metric . I created a second level that I called "upper level" . After which I created a parameter "high end" using the quota between level 1 and upper level.
I created a rectangle by popping snap 3d and converting the points into "adactive" .I extruded the solid by associating the altiza to the "wine upper part" parameter.
then I went to family type and I selected pillars. loading in the project however going to stick the irregular shape to the wall does not unite me as if they were normal walls. What's wrong?
to make the project I still have 2 months I do not have to realize every single room . but the outside the inner garden and the staircase (an elliptical scale to tense) . if I remain time I would like to model also the inside of a room (the hall of the parties).
I opened the thread to follow me in some passage of the modeling not to ask you every single thing.
Tristan
Guest
I don't think you have much help because it's a pretty dated manual.I don't know how to make capitals, but I ordered the 24-hour manual for that.
I don't know. I just tried and it works from me.then I went to family type and I selected pillars. loading in the project however going to stick the irregular shape to the wall does not unite me as if they were normal walls. What's wrong?