save printer settings with autocad 2008

[reggio]

Hi, I can't understand why but I miss every time the print settings.. .
allego screen shoot

1) I set the first parameters and then save as "pdfa4"
2) launch another print: gives me a warning... but what drivers are missing if you first printed...? ? ? ?
3) within the press and "pdfa4" there is no more

... I start putting the parameters back... every time... for every print... and it doesn't change if I put the network printer...

How can I solve this?

 

[Shape]

Hi, I can't understand why but I miss every time the print settings.. .
allego screen shoot

1) I set the first parameters and then save as "pdfa4"
2) launch another print: gives me a warning... but what drivers are missing if you first printed...? ? ? ?
3) within the press and "pdfa4" there is no more

... I start putting the parameters back... every time... for every print... and it doesn't change if I put the network printer...

How can I solve this?

is the file always the same?

bhè is evident that the driver message you are required is not for the pfd but of a printer that you probably did not install on the pc, so in the page setting that printer is stored and therefore it is normal that by default he proposes you that.

 

[reggio]

is the file always the same?

bhè is evident that the driver message you are required is not for the pfd but of a printer that you probably did not install on the pc, so in the page setting that printer is stored and therefore it is normal that by default he proposes you that.

hello and thanks, the file is not the same... I obviously have not understood anything about how it is configured.. .
I thought saving the settings in the future gave me the opportunity to call printer/flight settings, for example
pdfa4orizz; pdfa4vert; toshibaa3orizz; ....

... would you want to clear my mind and help me set up printers well?

 

[Shape]

hello and thanks, the file is not the same... I obviously have not understood anything about how it is configured.. .
I thought saving the settings in the future gave me the opportunity to call printer/flight settings, for example
pdfa4orizz; pdfa4vert; toshibaa3orizz; ....

... would you want to clear my mind and help me set up printers well?

in fact the configuration of the print you made is saved in the design and is not system.

the best method in my opinion is to use a template file that already has a whole set of settings, text styles, quotes etc.etc and why not also print settings (in the limit of possible).

I remind you cmq that in the autocad options (instruments, options, print and publication) there are the default printing settings that are activated only if there are already no settings in the design.