sections of a rendering

[Nemesi]

Hello, my problem is more than anything related to the knowledge of the potential and controls of autocad 2010.
how can I create sections, plants, prospects etc from a rendering?

 

[numero1]

Well it's a bit like having a 1-day license and driving a formula1.
However, if you have the three-dimensional model file, you can also get everything you asked, and obviously the final rendering, i.e. the realistic image of the object/made/construction etc. etc. you want to make.
but in 1 case as in the other it takes some explanations (at least a lot) I would recommend you to start from a step + low.

But my question is this: what do you have?
because if you have only a rendering image without everything behind it, that is, you don't have the original 3d file from which the rendering was taken, you can't go back to the various information.
Hi.

 

[Nemesi]

Hello number1, thank you for the answer.
then, I theoretically already have plants, sections and prospects, only that in the realization of the 3d I made some changes (although minimal) that obviously do not match with the original plants. so now I am in the situation where, being short of time, I would need to "cut" in various points to have sections, prospects and, indeed, plants very quickly

 

[Tristan]

Hello number1, thank you for the answer.
then, I theoretically already have plants, sections and prospects, only that in the realization of the 3d I made some changes (although minimal) that obviously do not match with the original plants. so now I am in the situation where, being short of time, I would need to "cut" in various points to have sections, prospects and, indeed, plants very quickly

use _flatshot command for prospectuses and _sectionplan for plants and sections. for more details look at the online guide

 

[Nemesi]

Thank you so much! the sectionplan command has been of great help, thank you, but flatshot I can not really use it.
I'll explain better.
I consulted the online guide and send me back to geompiatta.
indicates to select the destination, as needed a separate file for viewing in 2d, select extracted in a file.
in the new file there is nothing!

you screen the geompiatta table http://img713.imageshack.us/img713/395/screen1yk.pngrectifying:
If at the time of printing I set the view I want to print (to understand, place the front view of the prospectus) should not the print of the only visible prospect develop?

 

[numero1]

flatshot is with autocad in English.
geompiatta is with autocad in Italian.
You are obviously in the second case.
in the new file once you opened it you tried to zoom in and ?
Hi.

By the way, Tristan posted the commands with the front underscore (_) all English commands work on any pc even in Chinese as long as you put the insignia.
That's because there are people who are used to using English conmands for years now.
Then also _flatshot works if you write flatshot no!