separate with reentry. empty lines?? ?

[Tantocattivo]

Hello.
because when I insert the separate material there are rows like 1.1.1.1 the 1.1.2.1 that practically do not exist? if click open part opens the part with the name immediately above. The thing I've seen in common is that I'm a nurse. Do I have to cancel one by one or am I missing something?

thaks

 

[xxfast]

probably did not enter the property "number part" in the missing parts, but the amount is nothing and seems strange to me.
or have they been excluded from separate materials ?
or else... I don't know. .

 

[MassiVonWeizen]

those fallbacks come from the cutting distinte in the multibody parts. the plates, but I could be wrong, as the structural members create voices with properties compiled in the cutting distinction (in fact, they give way to the creation of the cutting distinction).
when you make a distinct materials with re-entry, the multibody bodies are also recognized. if you do not update, do not properly fulfill the properties of the separate cut then the distinct materials give you this result.

in the quantity field, from what I understand, should report the variable indicated above in the properties of the bodies see guide. if nothing appears perhaps that voice is set on Nobody., or maybe something not readable from the material table

 

[Tantocattivo]

I have selected with the right on the elements of the cutting distinct, properties and then exclude from the cutting distinct and I solved. I am not practical of cutting distinct, but cmq I do not have multibody parts in the sheet concerned.
Thanks

 

[MassiVonWeizen]

I am not practical of cutting distinct, but cmq I do not have multibody parts in the sheet concerned.
Thanks

what I wrote

the plates, but I could be wrong, as the structural members create voices with properties compiled in the cutting distinction (in fact, they give way to the creation of the cutting distinction

means that the creation of a sheet is created a separate cut, which does not necessarily mean a multibody part, I hope to have been clearer

 

[Tantocattivo]

you've been clear, i have to go deeper into the cutter. i didn't know exactly about the existence of that menu with those voices, in fact thank you to your firm i arrived and solved.

 

[Polymar]

those fallbacks come from the cutting distinte in the multibody parts. the plates, but I could be wrong, as the structural members create voices with properties compiled in the cutting distinction (in fact, they give way to the creation of the cutting distinction).
when you make a distinct materials with re-entry, the multibody bodies are also recognized. if you do not update, do not properly fulfill the properties of the separate cut then the distinct materials give you this result.

in the quantity field, from what I understand, should report the variable indicated above in the properties of the bodies see guide. if nothing appears perhaps that voice is set on Nobody., or maybe something not readable from the material table

Massive, I am encapsulated right now in the problem of empty rows, all of course associated with sm parts, and reading your post I solved immediately! Hommage!