sheet parts + configurations = problems

[malf]

in sw 2017 known strangeness in updating sheet metal parts to changing configuration... I don't remember if they were in the previous versions.

I create a skeleton part made only of sketches and put it in a set. has two configurations height 1 and height 2 with two heights for the vertical sketch.I insert this skeleton part into a general assembly and equal in a subassembly. in this sub assembly I create a sheet part that "extruded" until the top of the vertical sketch of the skeleton part with a "external relationship in the context"all files have a height1 configuration and a height2, and all configurations are matched with each other the same. now I put myself in the outer axieme and change configuration height1-> height2 and vice versa. everything goes for the best and the sub assembly and the schelter part follow the change of configuration. the part in sheet no, also updating remains of the previous height and I have to open the sub assembly because it finally resizes. This is a real trouble for the complex assemblies that see, when changing configuration, conflicts and inconsistencies emerge, for the sheet metal parts that do not want to know about the changed configuration, until the respective sub assemblies are opened.
Am I wrong? is a software bug that has solved with updates I don't have?
I add the simple attached model
View attachment Prova di contesti SW.zip

 

[MassiVonWeizen]

but do you do a rebuild after making the changes? I speak of the ctrl+q http://help.solidworks.com/2012/italian/solidworks/sldworks/rebuild.htm

 

[malf]

So, I didn't know about the ctrl+q command, I only did the traffic light, but still the model is refractory to this.

 

[malf]

I noticed that if you change the configuration, the sheet part does not follow the change of configuration, but if you save and reopen the model, the first regeneration performs the hoped transformation, then return completely insensitive to the subsequent configuration changes. This is obviously a bug.

 

[malf]

Correggo, it can't be a bug, it's something wrong in my parts update settings, because I replaced the sheet part with a part with a simple sketch inside and neither does this follow the configuration change of the outer axieme.

 

[MassiVonWeizen]

try reading this https://forum.solidworks.com/thread/92426try to do google research with this string solidworks subassembly not update site:forum.solidworks.com

 

[malf]

boh, I've been reading post on post for two days. possible that no one noticed the problem? the type of discussion linked by mass (which is the closest to the problem) has, in fact, a problem of linking quotas to global variables.

two things I noticed:
- if I change a quota directly into the "skeleton part" model, at the exit the subassembly immediately update, without even having to rebuild. so the problem seems derived from configuration management

- if I change configuration, as long as the subassembly does not want to know how to follow the changes, but if:
change config->salvo all-> closed and manually reopen a reconstruction-> the subassembly finally follow the change of config. and then freeze again to the subsequent configuration changes.
what has the first reconstruction (manual) just opened a file that others do not have? ? ! !

 

[MassiVonWeizen]

contact support and report to solidworks

 

[MassiVonWeizen]

a miserable help can come from editing part/axioms on sub-axis instead of opening them.

 

[malf]

Yes, I did not think about it. good idea to save time