show different opening configurations

[xLOGANx]

Hi, guys.
is it possible, within proe wf4, to realize different opening configurations for the same set? I'll explain. I have a structure (in practice a wardrobe) equipped with 3 doors that must be opened and closed according to a certain order to access the battery pack. my idea is to divide the table into 4 sectors and, in each of these, insert the various openings so as to get to detach the package.
Can you do that? and if so, how?

Thank you.

 

[Therapy?]

if I have well understood you could do it or with the simplified representations that allow you to have for each configuration the axieme with visible or hidden components that then call back in the view of the putting at the table (in this case you should initially create the axieme with all the open and closed doors)

or you could use family table by making the various configurations with open and closed doors: in this case you would have practically a 3d for each version even if they are actually all in the main file to be recalled in the table

if you do not know these commands try to look at the online guide if you have other doubts ask as well

 

[maxopus]

perhaps it is easier with snapshots of animation (animation).
You don't need to resort to family tables.

 

[xLOGANx]

Thank you for your answers. Going nose, I used the same solution (the first) proposed by therapy. the solution of snapshots, perhaps, would have been the best but the problem is that the axieme was assembled without any logic and I had no time to change most of the constraints imposed.
Thank you, dear!