sinumerik 840 d does not read me a program in iso

[LuisVito]

hello to all

in company we have a famup with cnc sinumerik 840, the machine is connected in network with the office cam.the problem is in the fact that we can not operate the machine with iso programs, it goes in error because it finds invalid codes but that in reality are purely iso type g40,g80,g43,h,ecc.

ps: many times we cannot transfer the program from pc to cnc,

Thank you!

 

[safe60]

The control is rightly reporting you errors because the program you sent is not for the sinumeirk. For example: the code g80 (exit from drilling cycle..) in the siemens dialect corresponds to the mcall instruction. That's why it gives you the mistakes you've indicated. The same can be said for the other codes we mention. siemens has a language that in part is similar to the iso but mostly it is not. Is your program handwritten or comes from a postprocessor? In the latter case, is this a post for siemens sinumerik or for another control?

Sandro

 

[PopeYe]

If you read the manual well, there is the possibility to set the cn in such a way that read the standard iso typical of the fanuc (g43..g81..g83..g80 etc.) , you just have to set a machine parameter (which I don't remember now) , the only problem is that after you have to reset it again to let him read the siemens , of course you don't mix the two languages.

 

[safe60]

clearly siemens "push" their own language even if by compatibility it is possible to configure it in such a way to read the standard iso format. Heidenhain, for example, does the same. It is obvious though that he has the control set in the modalita' native siemens. It is also necessary to verify that the machine manufacturer has not implemented custom controls that are only available in the native mode of control, disabling the possibility to change the type of language interpreted by the cnc. In my opinion, siemens is one of the most complex controls that exist at the programming level. He's probably also one of the most advanced potentially, but first you have to study it very well. all things for which time is never there.

Sandro

 

[PopeYe]

In fact, it is normally used in the workshop who already has a vast library of part-programs optimized in the same language, of course it must be optimized all the rest, it is absolutely not worth it to try only a few cycles.
If there were other similar machines in the same workshop with the iso, there would certainly be the advantage of being able to exchange part-programs on the machines, it is only to be evaluated.
It is more than complex that siemens is 'corporated', in the sense that in order to do a certain thing there are different possibilities, of course it is necessary to take confidence, for the rest it is more or less like the others of the same range (or price you want).

 

[ilmuffo]

This is what you are http://www.galileicrema.it/intraitis/documents/materialedidattico/manual programming x 840d.pdf in Italian, or in English > http://www.flintmachine.com/pdfs/fadal-manuals/siemens-manual/short_guide_programming.pdf♪ I don't know ♪