sketch and section

[wall87]

good evening to all, in the version of nx 11 when I do a sketch and then staying inside the same I also do a section, this, if it is placed in a part of the plan above the sketch, hides it and you can not work or see it.
is there a way to make the sketch remain visible independently of the section?
I hope I've been clear, thank you.

 

[wall87]

is this something that only happens in version 11 or even in others?

 

[ceschi1959]

is this something that only happens in version 11 or even in others?

manda uno screenshot che non ho capito bene.

 

[wall87]

in image 1 you can see the plan in which I create my sketch, in image 2 you can see my sketch, now if during the sketch I do a section of the detail in front of the sketch (image 3) you see it, while if the section I do it behind the sketch (image 4) you can no longer see it.
I hope I've been clearer.

 

[ceschi1959]

in image 1 you can see the plan in which I create my sketch, in image 2 you can see my sketch, now if during the sketch I do a section of the detail in front of the sketch (image 3) you see it, while if the section I do it behind the sketch (image 4) you can no longer see it.
I hope I've been clearer.

Also in the last version nx 1996 same thing, I never had the opportunity to use the sections during the creation of a sketch.
Can you help the whole transparent (see thu all)? Sorry, but I'm used to English.

 

[The_Matrix]

in image 1 you can see the plan in which I create my sketch, in image 2 you can see my sketch, now if during the sketch I do a section of the detail in front of the sketch (image 3) you see it, while if the section I do it behind the sketch (image 4) you can no longer see it.
I hope I've been clearer.

maybe better if you use the sketch section functionality

 

[wall87]

Also in the last version nx 1996 same thing, I never had the opportunity to use the sections during the creation of a sketch.
Can you help the whole transparent (see thu all)? Sorry, but I'm used to English.

Unfortunately, it would not solve because I would have the surmount of several lines since I work with a little complex details and in the end I would not understand anything.

maybe better if you use the sketch section functionality

I mean? Could you please explain yourself? What am I supposed to do?

 

[The_Matrix]

Unfortunately, it would not solve because I would have the surmount of several lines since I work with a little complex details and in the end I would not understand anything.



I mean? Could you please explain yourself? What am I supposed to do?

in the sketch environment there is a function called "section": if the awards allows you to dissect the model on the sketch plan.
if you activate it, then, along with this, you have a second function that is called "slice" that makes you dissect the solid on both sides of the sketch plan

 

[wall87]

I tried to look at the functions when I'm inside the sketch in di section there is only one that you are inside or not; Perhaps you refer to the slice function that is located in the section, if unfortunately not this would solve the problem.
I would need the sketch to remain always visible regardless of the section.
However listening to colleagues is a thing that nx takes behind from several versions, I would have expected that in the most up-to-date versions had been solved obviously is only our internal problem, but...
I thank you for the answers.

 

[The_Matrix]

I tried to look at the functions when I'm inside the sketch in di section there is only one that you are inside or not; Perhaps you refer to the slice function that is located in the section, if unfortunately not this would solve the problem.
I would need the sketch to remain always visible regardless of the section.
However listening to colleagues is a thing that nx takes behind from several versions, I would have expected that in the most up-to-date versions had been solved obviously is only our internal problem, but...
I thank you for the answers.

What I tell you is the "section" function (and his sister "slice") you have on the sketch home.
when the selection does a section on the sketch plan.
if you activate the "slice" it makes you a section on the zero depth sketch plan.

I don't understand what you want to do, otherwise

 

[wall87]

Please do an image of where you find these functions. Thank you.

 

[The_Matrix]

original
activated section
slice type activated section

 

[wall87]

Now I understand why we didn't understand, I had specified that I use the nx11 version, while you're using a newer one; the commands you have as independent functions, in the 11 are inside the section function. I have not been able to make myself understand what I wanted; I'll try again.
Imagine doing the sketch where you posted the photo, at this point I do a section, we hypothesize the same as you did, only that I do not care about the slice (or slice) but it interests to see all the 3d behind the section. At this point, as you will know, the section can move forward or backwards making less visible the 3d. If now I do a section more or less where the orange cylinder of your photo is located I will see the 3d and even the sketch, and this is good for me, but if I do a section where the holes of that blue plate are found I will see only the 3d section, while the sketch I will not see it anymore. Here, instead I would like the sketch to remain always visible, regardless of the position of the section.
I hope now we can figure out if not tonight I'll try with other photos.

 

[The_Matrix]

now i understand why we didn't understand, i had specified that i use the nx11 version, while you're using a newer one; the commands you have as independent functions, in the 11 are inside the section function. i have not been able to make myself understand what i wanted; i'll try again.
imagine doing the sketch where you posted the photo, at this point i do a section, we hypothesize the same as you did, only that i do not care about the slice (or slice) but it interests to see all the 3d behind the section. at this point, as you will know, the section can move forward or backwards making less visible the 3d. if now i do a section more or less where the orange cylinder of your photo is located i will see the 3d and even the sketch, and this is good for me, but if i do a section where the holes of that blue plate are found i will see only the 3d section, while the sketch i will not see it anymore. here, instead i would like the sketch to remain always visible, regardless of the position of the section.
i hope now we can figure out if not tonight i'll try with other photos.

unfortunately, i don't have those old versions anymore and i can't try.
in 1980 if you go in section seziona on the sketch plan and just