sketch duplication

[cersil]

Hello, it will also be banal, but I can't perform a duplicate of a sketch. or better cover the sketch ctrl c then I create a new sketch and neck ctrl v and the sketch appears but without quotas or constraints. how to keep them in the copy and paste. I tried also in the tree to drag the sketch with the ctrl but while appearing the simboletto of + next to the pointer then does not copy a nice nothing.thanks

 

[meccanicamg]

In fact, that is not sketch duplication.
The first time you use the sketch for the first feauture. then within the feauture and click on the sketch and go to give the second feautures.... so it is shared.
version of solidworks?
normally anyway if you select everything copy almost everything....and usually lack the quotas to bind in a fixed way....usually with the origin. If you've made all odds from the origin ....well... even one will be copied.
If you look at guide online explained how to copy the reports.

 

[MassiVonWeizen]

then within the feauture and click on the sketch and go to give the second feautures.... so it is shared.

This is only valid if the two sketches match. If you want to use the same sketch geometry on different planes, for example, you can't do this way.
However the paste copy maintains the basic constraints (horizontal, vertical, hilly, parrello. . . )

 

[cersil]

the solidworks version is 2019 in Italian. I'm sorry to be ignorant, but I don't know what you mean by feature, maybe in the Italian version you'll say otherwise. I read the guide suggests to use copy entities from the sketch tool menu but allows me to copy inside a sketch and does it losing quotas while keeping the constraints. what if you use the normal ctrl c and ctrl v perfectly copy all quotas and constraints. The problem is that I want to copy from one sketch to another. I'm explaining I create a sketch that I call origin, in it I draw something that I quote and relatize. then I go out and want to have a copy of origin maybe to make small variations. on the tree there is no way to copy as you do with exploring resources. Perhaps I create a new sketch and name it destination and I go to paste what I copied originally but unfortunately I lose both quotas and constraints.

 

[MassiVonWeizen]

feature corresponds to function.
You want to copy a sketch?
selections the sketch
ctrl
select the plane, face, target surface
ctrl

on the tree there is no way to copy as you do with exploring resources

What does that mean? Would you expect the context menu with the copy voice?

solidworks version is 2019 in Italian

perhaps it is the case of updating the profile

 

[cersil]

to the copy and paste I had arrived, but the problem is that you lose constraints.

 

[MassiVonWeizen]

I have made copy paste in various manners and keeps me always the constraints.
attach a file, a screen of sketch card system options and one of the sketch tool menu> sketch setting

 

[MassiVonWeizen]

to the copy and paste I had arrived,

clarification; if I have specified the method is because sometimes in a parametric program the sequence of commands can determine the result.
as you do not understand if you do copy paste from the inside of the new sketch or otherwise I have reported you a working method.

 

[cersil]

in fact doing as you say:

selections the sketch
ctrl
select the plane, face, target surface
ctrl

The thing works, I went into a sketch I copied a part or everything then I created a new sketch and glued them. Thanks you are always very kind.