slow down.

[PICO]

Hey, guys, I've tried them all.
I offer a monument in the square to those who can help me.

I have a pc of all respect:
- gt680 portable msi with i7-2630qm processor, windows 7 to 64 bit, 16 gb ram, two 500 hybrid hard disk and 1.5 gb video card

- work with 64-bit autocad 2011 (but I also tried autocad 2013 without improvements).

- drawing in 2d on rows of approx. 7/8 mb.

- I have several blocks (average 3/6000 for each design, about 300 types in all), but these should indeed help the design speed, as written on the manual.

- I have minimized PC graphics resolution to have maximum performance

- with 3dconfig I activated hardware acceleration

- I reduced myself to freezing the heaviest layers when not needed, but it's not comfortable.

Despite all the zooms are snappy and when I go out of the block editor that I'm changing I have to wait even 10 seconds (inadmissible for the fluidity I need).

possible this slowness despite the power of the pc and the smallness of the file? ? ? ?
there will be a way to optimize everything or give even 12/13 gb ram dedicated only to the cad....

 

[PICO]

I forgot:

I also set Vistaris on 1 (instead of 1000) and minimized all resolution details on options.. .

 

[rpor66]

have vba installed? try to uninstall it.
if the laptop uses the hd3000 intel as a base and for the 3d relies on the nvidia, unless software updates to overcome the problem, I see it badly.

 

[PICO]

Sorry, what does that mean?
What is vba? Where do I find her?
Thanks for the answer.

ps. I'm never using 3d for that solid works.

 

[rpor66]

if you do not know what is vba it is very difficult you have installed it, you have to download it from the autodesk site and install it on purpose.
in any case is the visual basic for application, programming language.
the fact that you do not make 3d is of little importance, if you have activated the 3d functions of the graphics card you get a performance improvement even with the 2d.
test: purge, _erase _all and uncheck all visible entities, set whipthread to 3.

Let me know, bye

 

[PICO]

Anyway, you said to uninstall it, so better if I don't, right?
I always do purge.
I tried to put whipthread at 3 and it looks like something has improved, what is it?

 

[PlannerRoad]

If you can attach one of these files that creates problems.

 

[PICO]

I don't charge it.
I think it's too heavy (7.8 mb)

 

[Shape]

I tried to put whipthread at 3 and it looks like something has improved, what is it?

is a variable to use multicore processors in some operation (regen,redraw etc)

0
Non-activated multithread processing, regeneration and retracing are limited to one processor. this setting restores the operation of autocad 2000 and the previous releases.
1
multithread processing activated only for regeneration, distributing processing on two processors on a multiprocessor computer.
2
multithread processing activated only for retracing, distributing processing on two processors on a multiprocessor computer.
3
multithread processing activated for regeneration and retracement, distributing processing on two processors on a multiprocessor computer.

 

[Shape]

have vba installed?

I've already read this on the net, but is it true?

and if it is true, it only affects when I first load the vba module (which I think is not active until you use a macro) ?

 

[rpor66]

I don't think it matters whether you started a macro.
with x64 the vba starts a module (you find it in activity management), I don't remember the name, I think it is x64server..., that in ole operations slows down a lot, try to make a copy/paste or to insert a full block, with and without vba installed.

bye

 

[Legs]

possible this slowness despite the power of the pc and the smallness of the file? ? ? ?

may happen that for some reason the hardware acceleration of the graphics card is disabled.
verify that at the bottom right of autocad the bulb designed above the small processor is lit.

 

[PICO]

question:
Since autocad 2013 is even slower than acad 2011 (what confirmed by others) and it seems that more the version is recent and slower, if I worked with autocad lt would be faster?

If you tell me I'm trying to get him.

But I have to find 2011 64-bit.

 

[PICO]

the hd acceleration bulb is active.. .

In the meantime, every time I get out of the block editor, I'm gonna plant myself and close the file and then reopen it.

 

[Shape]

but I found 2011 at 64 bit.

wooow has an assortment of enviable software licenses. . .

If you find one more...:finger:

 

[linch]

Hey, guys, I've tried them all.
I offer a monument in the square to those who can help me.

- drawing in 2d on rows of approx. 7/8 mb.

- I have several blocks (average 3/6000 for each design, about 300 types in all), but these should indeed help the design speed, as written on the manual.
.

3/6000 blocks for drawing?but are they really necessary?
Have you ever verified their extension? exist sampling on the blocks?if yes, these load the drawing a lot.
Ultimately try to copy (if you can) and paste on a virgin page of acad all the dwg, rename and save,indi verify after a healthy "purge all" property.
a few years ago I solved a similar problem by applying the procedure described

 

[Tristan]

but I found 2011 at 64 bit.

What do you mean you have to "find"? You lost her in the bookstore drawers/scoffs? If you want here in the office I have an old version of autocad lt 97; do you want to try with this?

 

[PlannerRoad]

3/6000 blocks for drawing?but are they really necessary?
Have you ever verified their extension? are there samples on the blocks?if yes, these load the drawing a lot.... .

Something tells me there are sampling. And then I ask myself your own questions!

 

[PICO]

finding means simply downloading the trial version to see if it solves the problem (and I have my doubts).

My blocks are stupid rectangles without sampling.

design facade coverings in aluminum panels, therefore it is only a trivial chessboard with rectangles of different sizes.

since everyone then has to have his beautiful executive board, I am comfortable with the blocks to be able to have the automatic updating of the tables and the prospects.

But now the biggest problem is that I get out of the editor!!!!

 

[Legs]

But now the biggest problem is that I get out of the editor!!!!

This is a known problem. you need to install the hot fix that you find here:http://tinyurl.com/2gxttgpreferred the east form of the link allora uses questo:http://usa.autodesk.com/adsk/servlet/ps/dl/index?siteid=123112&id=2334435&linkid=9240618However try to install all the service packs of your version.