smart component creation problem

[philips93]

Good morning I have a problem with creating a smart component.
In practice to a hinge I have to associate the relative holes (extruded cut), going to create the smart component gives me this error, from what it might depend, I did several tests but I can't solve the problem.

 

[MassiVonWeizen]

I've never been interested in intelligent components so much and now I have no time to try to recreate this situation, but in the eye I would say it could be because you're trying to make a set smart using functions of its parts.
I'll leave you This link that speaks of intelligent subassienas (like your)

insert the software version into the profile and if you ask for clarification on the operation of a file attach it so that other users can study your specific case that your files and not with others created in a different way

 

[philips93]

modified the profile attach the file in question,
I should associate with the intelligent component all extruded cutting functions of the first component of the axieme

 

[MassiVonWeizen]

with the only file of together you do nothing. also serve the side files.
to understand the concept tries to put the futiles aside in the basket and then to open the axieme and see what happens.

 

[philips93]

Sorry, stupid mistake?
Riallego

 

[philips93]

However I also tried to save the hinge axieme in one part and the result does not change so I think the problem is not on the subassieme

 

[MassiVonWeizen]

guard that video

 

[MassiVonWeizen]

reading on the net seems that that problem depends on the fact that the component with the processing has external references.
In fact, visualizing the image is clearly seen that the selection function has an external reference.

 

[philips93]

I had already seen this video, however I solved in part using instead of the cut extruded the wizard creation command of holes.
this command can go well for the 4 holes of the screws, while for the 35mm big flat hole on the door I should force use the extruded cut

 

[philips93]

do you mean the cut-extrusion function5? in what sense external reference?View attachment 59245

 

[MassiVonWeizen]

do you mean the cut-extrusion function5?

Of course. This is what is recalled in the smart component creation property manager.

in what sense external reference?

in the sense that it is connected to another component.
indeed I will tell you that, not being able to open your files, I assume that you have done the cut-extrusion function5 using as reference the holes of the hinge since also this has the external reference symbol.

 

[philips93]

so I used as reference the holes of the hinge itself, but I could not do otherwise.
What do you suggest to do to overcome the problem?
consider that if I make the creation of the holes wizard instead of the extruded cut it is okay (even in this case there is the external refraction) the problem is that the big hole from 35 mm I have to do it with the extruded cut

 

[MassiVonWeizen]

What do you suggest to do to overcome the problem?

defining holes normally with classic quotas and constraints. or eliminating all constraints and leaving the sketch completely indefinite. when you insert the smart component into the axieme the function that will be created will be without constraints because it will fit the smart component.

if there are reasons above it is logical that at the time of the definition of the intelligent component (we call it for convenience) you cannot enter a function (b) with external references (c), even if to the component (a) itself. because you would have a function that is linked to the future intelligent component (a), but also to the part (d) on which the function (b) was created. so in a set you would insert your smart component (a) that contains a reference (c) to a part that does not exist in that axieme or could even no longer exist on your computer.
summary legend letters:
smart component
b smart component function (cut-extrusion5 in your case)
c external reference (between zip-template and zip-blum in your case)
aside containing the original function (cerniera-template which contains cut-extrusion5 in your case)

 

[philips93]

problem solved by deleting the sketch of the extrusion cutting function5
Thank you very much

 

[philips93]

However, by better studying the intelligent components, I have noticed that if I insert the component into a parametric structure, once bound to it, if I change the size of the structure through a global variable, the component moves along with the structure but the functions associated with the intelligent component remain fixed at the previous point. in practice if I insert the "intelligent" hinge into a mobile, going to change the width of the furniture, the hinge moves accordingly but its holes remain in the position of the first save.
can you overcome the problem somehow? or are these intelligent components not so smart?

 

[MassiVonWeizen]

Did you do a ctrl+q reconstruction?

 

[philips93]

Of course, but nothing changes

Did you do a ctrl+q reconstruction?[/QUOTE

 

[MassiVonWeizen]

strange because I just tried it and it works, see the video

 

[MassiVonWeizen]

in the video obviously I use the reconstruction through ctrl+q, but it is seen that the simple reconstruction ctrl+b or r does not work
on the page http://help.solidworks.com/2018/italian/whatsnew/c_rebuild_tools.htm explains the types of reconstruction highlighting that there is also ctrl+maisuc+q

 

[philips93]

so it also works to me the problem that the hinge is bound to the structure of the furniture and to the door, changing the size of the furniture for example the height the hole is not moved accordingly