solid retinals covering the design

[nikale1972]

Hello, I have a problem with printing a dwg file designed in 2d
I have inserted solid snail nets to give a color effect to 2d prospects
in the printing phase the solid nets cover me the lines of the props of the designed building.
I modified the union lines in the print file, but the problem is not resolved.
Do you have any ideas? ? ?
Thank you

 

[warburg]

..can be just a display order problem, i.e. you have to use the command that carries the retino behind the lines...
If it doesn't work, at the moment I don't know what else to suggest

 

[Fulvio Romano]

should be what Warburg said.

if you do not find the command, I typically select the lines around the retini, the copio, the gates and then move the copies to the original point.

since the copies were created after the retino, they turn out above it.

 

[nikale1972]

..in fact in the retini command there is the curtain "display order" and it should be inserted ...port back. .

Thanks again

 

[x11start]

I made a lisp that once launched select all the retini (hatch) and the polyg (solid) of the design and bring them back.
Obviously this is not true for those contained in a block.

by command write:
(Translated with Google Translate)

and launch with:
behind

 

[PlannerRoad]

as curiosity in the version 2011 a new command has been inserted: hatchtobackfrom the online guide:
♪elect all the sections in the design, including the deduction models and solid and foam fillings; also sets the display order behind all other objects. Layering objects are also modified on blocked layers.