solidwork drawing corrections

[unknow Error]

I have just started using solid work (by self-taught) and I am performing simple drawings (drawings found on the web) to practice, and I would like to ask if someone was willing to correct my work ,disputing any errors and giving me advice on strategies to adopt. Thank you.
allego drawings

ps can you tell me how to load the drawing performed on solid work as well?

 

[MassiVonWeizen]

the design must be loaded zippered and must also contain the part. the correct way is to make the pack&go from file menu.
instead of relying on tutorials found on the net, that it is not possible to know if valid, you must start from the internal tutorials that are well made.

 

[MassiVonWeizen]

the design is not listed well, but it is a technical problem not of solidworks

 

[unknow Error]

no I do not mean this design,the drawing attached and taken from the internet I since from a few spins I started using solidwork I tried to run it.I just started

 

[drake]

I have just started using solid work (by self-taught) and I am performing simple drawings (drawings found on the web) to practice, and I would like to ask if someone was willing to correct my work ,disputing any errors and giving me advice on strategies to adopt. Thank you.
allego drawings

ps can you tell me how to load the drawing performed on solid work as well?

Good morning anyway!
Usually when entering a forum you show up and at least in the first message you write.. .
or save everyone or simply hello.
there is written in the rules of the forum that you have certainly read, as well as simple education.

 

[unknow Error]

in the sense I looked for the quoted design on the internet, looked at it and tried to make solid using part , I did not put on the table because I am not yet able to

 

[unknow Error]

Sorry I didn't read the rules however my name is ivan I 17 years old and from a few years I have looked at solid work psychological study in a psychosocial high school pedagogical (I know you will be wondering how I ended up using solid work)

 

[MassiVonWeizen]

If you place a design and ask to correct your work it is obvious to think you refer to that.
attach the file otherwise there is nothing to correct. indicates in the profiles the version of solid

 

[unknow Error]

uso solid work student edition 2018-2019

 

[MassiVonWeizen]

mail the file....
do you have mechanical or technical skills in general?

 

[unknow Error]

I only made the drawing

 

[unknow Error]

Some things I'm beginning to understand are not too difficult

 

[unknow Error]

I have no mechanical or technical expertise in this area

 

[MassiVonWeizen]

I only made the drawing

this is a side file, not a drawing.
learn the correct terminology if you want to understand

I have no mechanical or technical expertise in this area

So you're gonna make random modeling... That's not how it should work, but we'll see how it goes

 

[MassiVonWeizen]

uso solid work student edition 2018-2019

what is not clear of "indicates in the profiles the version of solid "?
There is no version 18-19, or 2018 or 2019. as you can not open future version know the correct version is important not to download and try to open incompatible files... otre to give correct advice

 

[unknow Error]

but as... I made the drawing with the plans the cut quotations extruded basic extrusion
,I'm sure I made the drawing

 

[unknow Error]

but what if not what I did when you opened the file what you saw?

 

[unknow Error]

this is a side file, not a drawing.
learn the correct terminology if you want to understand

So you're gonna make random modeling... That's not how it should work, but we'll see how it goes

differences between part files and drawing?

 

[MassiVonWeizen]

I didn't open the file because I didn't submit to 2019, but if the file extension sldprt is a side file
do the internal tutorials instead of doing randomly because they serve to understand the logic of the software there is to take confidence with the terminology, especially if you do not know anything about technology and technical design

 

[unknow Error]

but I looked at some tutorials on how we did the pieces