solidworks - help for design cobra lamp of light martyrs

[marcoghila]

who can help me draw this lamp with solidworks? ?
I've been trying for days but I just can't!!
I tried with the surfaces but I can't find the right procedure,
with the loft is not bad is not perfect. .
this is the link with the images of the lamp:http://www.martinelliluce.it/index.asp?pid=2503&sid=the problem I have is how to make the gentral joint since it has to follow a sphere and end up in a circle. .

I expect your help! !

 

[marcof]

who can help me draw this lamp with solidworks? ?
I've been trying for days but I just can't!!
I tried with the surfaces but I can't find the right procedure,
with the loft is not bad is not perfect. .
this is the link with the images of the lamp:http://www.martinelliluce.it/index.asp?pid=2503&sid=[/URL

aspetto vostro aiuto!!

at least you have to attach the swx file with which you can't move forward from those photos you have to go a lot "to feeling" to model it the same.

the problem I have is how to make the gentral joint since it has to follow a sphere and end up in a circle. .

It's not that it's very clear... However it will be a matter of setting the various profiles of the loft and the guide curves placed in the right place.
In my opinion, however, you have to cut off a protion that serves a spectral surface, shape the inner face of the support and merge the two surfaces with blends or things like that by curing the continuity of curvature and tangences.
I saw on the site that there is a link that refers to 3d drawings. I don't even think about it. you, what do you need, have you checked what this is about?

 

[marcoghila]

I thank you for the suggestion but sincerely I tried them all and I can not do a good job with the guide curves since they have to be on a ball in part and in part not..
the attached file is made with sw 2010 sp2.1

if you download the photos of the site you see the problems I say. .
You need the back and side as a photo and you understand the problem. .
the diameter of the ball is 40 cm


Help me!

 

[marcof]

I thank you for the suggestion but sincerely I tried them all and I can not do a good job with the guide curves since they have to be on a ball in part and in part not..
the attached file is made with sw 2010 sp2.1

I have 2009... sorry.
and for the 3d downloadable from the site? Have you checked?

The help!

azz... here shaves the melodrama:redface:

 

[marcoghila]

Do you have any suggestions?
How would you do that?
if you have time to send me a file with your suggestions. .

the file you download is not in solidworks so I don't need anything.
Mine is a challenge to make a complex object like this.
that doesn't seem to be... .

 

[sampom]

Do you have any suggestions?
How would you do that?
if you have time to send me a file with your suggestions. .

the file you download is not in solidworks so I don't need anything.
Mine is a challenge to make a complex object like this.
that doesn't seem to be... .

..see engineer,
I could also give you some tips and possibly send you an example file (which I already sketched).
that object is not so "complex" as you support and if you have a minimum of mastery of solidworks you model quietly also with solids (as start then maybe to refine). . above all having the object underhand to obtain all the measures and forms:wink:. .
But you have to tell us that "legame" you have with the company you have linked (I already know) and that you have to model it/build it when you already have it in the catalog?
if you are looking for a "contorto" way to advertise (maybe at the expense of other industry manufacturers) you advance that you have wrong channel; I invite you to read the forum rules.

We wait for clarification. .

greetings
Mar

p.s. I invite users not to provide aid until the situation is clarified. Thank you.

 

[Sasso SP]

Hi.
looking saltily at the 2 images of the link I tried to realize the lamp (fall afternoon very boring..hahahaha) however place an image to hear your ratings.
Obviously from the images of the link changes but the concept should be the same.
p.s.
I didn't use the surfaces.

 

[sampom]

Hi.
looking saltily at the 2 images of the link I tried to realize the lamp (fall afternoon very boring..hahahaha) however place an image to hear your ratings.
Obviously from the images of the link changes but the concept should be the same.
p.s.
I didn't use the surfaces.

Did you read what I just wrote? ?

Where do we live?

greetings
Mar

 

[marcof]

Do you have any suggestions?
How would you do that?
if you have time to send me a file with your suggestions. .

Of course, maybe you send me the iban and I also make you a transfer.
see, engineer, as I am a curious person, and you did not want to tell me what kind of model 3d you can download from that blessed site, I registered, receiving by email password and id for access, finding then there was no 3d model to download, or alemno I did not find it.
then, engineer, I often distract myself and besides curious I also become naive. the sampom post put the flea in my ear and then I went to cover the mail. I wanted to look for some reference in the header but there was no need: sender turns out to be a certain marcoghila####atmartinelliluce.it
There's nothing to say, you can compete at james bond and you have an ability to dissimize really commendable. a real secret agent, licensed to take for c##o
These half-shoes from borgata spammers are worth enough and you regret some cabaret artists who attended this forum to pick up some extra licenses at the end of the month.
I didn't like your way of asking for help but I tried to survive, because sometimes I'm naive, and I thought before I stimulated you to post something and then give you a hand, as we did with someone who really needed a hand but who was banging to try to pull something independently, but law, unlike you, he has balls and it was a pleasure for everyone to help her
Anyway, you had enough fun with this painful little game. I assure you in the morning that I don't want to spend today and I'm calling you a light martyr. If you're the literal, I'll know what to say, and if you're not, and I hope so, I'll know what to say.
This discussion, for safety, save in html and the mold in pdf, then I will send it to your marketing office with a nice letter of accompaniment where, I assure you, I will replenish the dose.
see, engineer, spam can also endure and possibly ignore it. I get my ass, being naive, can also happen to me, but if I notice, especially if this has requested that I devote even 5 minutes of my time to the subject who is taking me by my ass, then I am incaxxo and in my little one, later, I try to hurt and touch.
So, engineer, tomorrow.. .

 

[marcof]

I thank you for the suggestion but sincerely I tried them all and I can't do a good job

I see you can't do a good job. You miss the basics of marketing. you can't take it for the cu#o potential customers, and above all you can't do it without first beard, wig and nose very well done.
the risk is that even the last of the naives, like me, then he notices and goes mad.
I have to post the link to the profile of marco ghila#########i.
ah, I hope you will appreciate, even if you don't deserve it, that I don't put your name wide: google would be more merciful than it will be

The help!

You really need it. .