http://help.solidworks.com/2012/ita...s.htm?id=5ebe79acf7bf432fb6642ed54b59fdd8#pg0Hello I have created a conical body as part and now I would like to turn it into sheet metal, only that I have no idea how to do it since I can not use the classic function converts into sheet metal.some can help me?
is it possible to obtain the flattened state that indicates the diameter of the sheet before the conical deformation?
test to save qua:My goal is to start from a record, then it is deformed with a punch and a matrix and thus assumes the form of cone. so with solidworks I have the cone and I would like to get the diameter of the flat disk. Can you do that?
No.My goal is to start from a record, then it is deformed with a punch and a matrix and thus assumes the form of cone. so with solidworks I have the cone and I would like to get the diameter of the flat disk. Can you do that?
if it speaks of "disco" I take for granted that it wants you to obtain it by stamping, considering also that the development of a cone has been treated tens of times in the forum, then easily available (see link attached)I don't need any application because I feel like I understand it's a fold even if the piece is conical... those are for funnels.
Can't you post that body?
Yeah, you're right. I had misunderstood...if it speaks of "disco" I take for granted that it wants you to obtain it by stamping, considering also that the development of a cone has been treated tens of times in the forum, then easily available (see link attached)
http://www.cad3d.it/forum1/search.php?searchid=1828568:smile: