special design with subframes

[daaninone]

from the part where you would put the cart but you have a part of figure, it would mean to make a cart that runs under the mold closing plan.
I feel complicated and expensive.
But maybe I didn't understand your idea.

precisely. I could create a quarry from below or a carryover from above to insert the cart.

 

[TECNOMODEL]

It seems like a complication.
you should also create a delay in opening the cart and an advance in closing compared to the other, all extra work that cost.

 

[TECNOMODEL]

My idea would be this, very schematized. . .in green the cart that furnishes with a normal inclined plug, in fuchsia the dowel that leads with a spring.
the cart, at the end of its closing stroke, puts in place the dowel.

 

[daaninone]

My idea would be this, very schematized. . .View attachment 51450in green the cart that furnishes with a normal inclined plug, in fuchsia the dowel that leads with a spring.
the cart, at the end of its closing stroke, puts in place the dowel.

very functional . but I have to cut on the part of the subsquadro because the cart part green upper side is full.

 

[TECNOMODEL]

I don't know what you mean.

 

[Meteor02]

for how I see it with 1 piston thread the 2 rods that create the under side squadrons and with a free cart the front part.

 

[TECNOMODEL]

I had 5 minutes free and I looked into the piece well, I saw only now that it is not possible to extract a cart from the side where the two longitudinal excavations begin because above there is material that would prevent the extraction of the piece.
I'm starting to think that piece is not feasible.
How are you doing?

 

[daaninone]

I had 5 minutes free and I looked into the piece well, I saw only now that it is not possible to extract a cart from the side where the two longitudinal excavations begin because above there is material that would prevent the extraction of the piece.
I'm starting to think that piece is not feasible.
How are you doing?

I have changed the project another priority for the moment as soon as I take you back. Thank you.
However it is feasible, for the 1 movement you have to move only the side the center is full and remains fixed. image below the female

 

[TECNOMODEL]

always remains the part above the two side teeth that prevents the extraction of the piece.
and you still have to move the front tooth.

 

[Mirror]

control one thing:
Are you sure that the geometry in photo 1 is what you have attached, and that it is not like in photo 2?

in photo 2, red surfaces are aligned on the same floor

in photo 1 that geometry don't even do it if you cry in Aramaic, I'm sorry..

 

[TECNOMODEL]

control one thing:
Are you sure that the geometry in photo 1 is what you have attached, and that it is not like in photo 2?

in photo 2, red surfaces are aligned on the same floor

in photo 1 that geometry don't even do it if you cry in Aramaic, I'm sorry..

I agree.

 

[daaninone]

control one thing:
Are you sure that the geometry in photo 1 is what you have attached, and that it is not like in photo 2?

in photo 2, red surfaces are aligned on the same floor

in photo 1 that geometry don't even do it if you cry in Aramaic, I'm sorry..

The piece is as in photo 2 you are completely right, in the sewage of mail I have not filled that plan, I ask forgiveness, then to make me forgive I offer you coffee.

 

[Mirror]

The piece is as in photo 2 you are fully right, in the sewage of mail I have not filled that plan, I ask forgiveness, then to make me forgive I offer you coffee.

we are always in the field of the pornography of the molding, but now the piece could be realized with 2 vertical movements ( above and below) and a longitudinal perforated cart in the central part in which to insert the vertical movement below.

I wonder if I said a boy.

 

[Meteor02]

I had a little time, I saw it so, purple trolley parades the 2 side pins and with the free gray cart the front part