stampa layout in a0

[tatyb295]

Hello everyone!I created a layout in a0 format and should take it to print in paper mill.
If they have autocad installed on the pc there should be no problem right? because just open my design, they go to layout and from there print it. . .
in case, however, to be safer, you want to convert it to pdf so that you can bring it there already ready to print what I have to do?

 

[Tristan]

you can print your dwg using a virtual pdf printer (already installed with autocad called "dwg to pdf") or use the exportpdf command

 

[MassiVonWeizen]

If they have autocad installed on the pc there should be no problem right?

Wrong. may have autocads, but may have setages of the typelines, restraints, map characters. . different.
how to print you had already been told three months ago

 

[tatyb295]

Yes but I do not understand how to convert a dwg file to pdf (from layout).I saw that there are many programs, but can you do it without them?

 

[Tristan]

but I do not understand how to convert a dwg file to pdf (from layout).

But, forgive me... did you read what I wrote on it?? It is good to be neophytes but at least to read the answers! !

 

[tatyb295]

But, forgive me... did you read what I wrote on it?? It is good to be neophytes but at least to read the answers! !

I'm sorry but I didn't explain myself well... I read your answer, but I would like to bring the drawing directly to cartolibreria! or maybe I didn't understand your answer. .

 

[MassiVonWeizen]

tristan told you that there is a pdf printer embedded in autocad and to use that. as I told you three months ago, see links I entered

 

[tatyb295]

tristan told you that there is a pdf printer embedded in autocad and to use that. as I told you three months ago, see links I entered

I'm sorry, you're right. I've got my head somewhere.
I reviewed your message and set the press as you told me.
Now I solved the problem!
One last thing, always banal. ..when I open the pdf,to display the sheet in a0(so as to be able to verify any imperfections of the drawing)just that imposed as a percentage 100%,right?

 

[MassiVonWeizen]

No, really? Can't you use a pdf viewer?

 

[tatyb295]

No, really? Can't you use a pdf viewer?

no may seem strange but it's the first time I use it!

 

[supermegacad]

Hi. .
of the controversy. It's very simple. first you should save it in pdf... especially if you go to paper mill to print and not in a press center.. .

it is very simple to do it by taking a look at this video
https://www.youtube.com/watch?v=5-bppxuuvok&list=pllobcggtduf3lwvvdixhd8-lojjyqccjr&index=13in particular the final part

 

[Cristallo]

certain that answer questions 3 months ago (here, 2 months in other post today) only to insert links to your videos...

 

[supermegacad]

certain that answer questions 3 months ago (here, 2 months in other post today) only to insert links to your videos...

Hi. I was about to not answer but for correctness. . .
the point is, as you know, since you are informed, I attend the site very little. I opened up today and I went through some discussion in different categories... where I could give a support I gave it and honestly I didn't even notice the fact that it was 3 months ago topic... I read between the first two pages and I answered where I could and informed myself about the things that could serve me... That's all.
Then, to you the judgment, they can also ban me from the site is certain that I will disperse. . .