step and environment design

[braunfish]

I have a set formed by parts created in inventor + 1 file step imported.
in the drawing I see only my parts. the step does not display it. Why?

 

[stefanobruno]

If you open the step alone what does it say?

 

[braunfish]

He doesn't say anything and opens it to me

 

[Tarkus]

But is the step solid or is it made by itself surfaces?

 

[stefanobruno]

He doesn't say anything and opens it to me

And you see it?

 

[frenk]

probably what you see in ipt is in the folder "building"
If so
dx key on folder
change of construction
left button on the compound and cover the object
should appear the icon in the browser
at this point you should see it in total iam

test :smile:

 

[gianlucap]

guys use this discussion because I have a problem with a step file that was sent to me by a client and this together was done with solid edge.
I opened the file and saved it as an iam file where there are all the compenants inside. I opened every single component by removing the "translucent", but importing my "assieme" component into the total where I have to insert it but in the table no, I don't understand the problem.
Has anyone had such a problem?

 

[Catafratto]

try looking for your set in the table browser, dx button above and check "include all surfaces", I think so go

 

[gianlucap]

try looking for your set in the table browser, dx button above and check "include all surfaces", I think so go

in the browser I appear, but it is in the drawing that there is no

 

[Catafratto]

does the visa appear to you under "include all surfaces" or does the knot appear to you?

 

[gianlucap]

does the visa appear to you under "include all surfaces" or does the knot appear to you?

the command "includes all surfaces" appears to me, but if I put the check mark it does nothing.
for convenience I tried to make a new table and popping "include all surfaces" my component appears to me and everything works!
but then the old table all quoted I have to throw it? inventor disappoints me, and then why do I have to go out on the new table and not go out automatically?
Thank you very much

 

[stefanobruno]

the command "includes all surfaces" appears to me, but if I put the check mark it does nothing.
for convenience I tried to make a new table and popping "include all surfaces" my component appears to me and everything works!
but then the old table all quoted I have to throw it? inventor disappoints me, and then why do I have to go out on the new table and not go out automatically?
Thank you very much

you have wrong to select in the browser the right view where you want to make appear ul piece.
I don't know other cads but what you can do in the inventor's table is anything but disappointing.
the problem is that you have to know the procedures and however you never end up learning a new one.

Bye.

 

[gianlucap]

you have wrong to select in the browser the right view where you want to make appear ul piece.
I don't know other cads but what you can do in the inventor's table is anything but disappointing.
the problem is that you have to know the procedures and however you never end up learning a new one.

Bye.

with the procedure that my has explained catafract the piece appears on all the views but if I make a new table.
and then, for what reason do I have to go to select this item (research still catafract, I didn't even know there was) but it doesn't automatically update?
that the table I have all quoted I have to delete it to return a new one because this component does not appear to me, so for me inventor loses confidence.
the procedure I followed (and I think it's right) is that in my whole I have inserted this component made by me coarsely and then wait for the detail of the supplier. Once I arrived, I converted the step file into iam, I opened my overall, I replaced the component of the detailed supplier with my, but the nisba table did not even update by popping this item.
Fortunately I noticed before launching the press and sending it to production!
In this case inventor disappointed me!
Thanks for everything

 

[Catafratto]

Are you sure you got the right knot? I mean, select the "encrypted" view, dx key -> find in the browser to select the right view, dx key on the node of the component placed in that view, "include all surfaces". It can be that you have to do it for every view. I insist because I always do it and it works.

p.s. also works with transparent surfaces

 

[stefanobruno]

in that case inventor my delusion!

It is enough to exploit its potential with knowledge.
The logic is:
- I'll put the first view with the options I'm interested in [ hai notato che su complessivi complessi ( bel gioco di parole ) le filettature non le mette ? ]- I make derived views and these keep the characteristics of the original view.
- Is that okay?
- proceed
- I'm not okay with that?
- I put and remove the appropriate snacks and game of button dx.

Bye.

 

[gianlucap]

Are you sure you got the right knot? I mean, select the "encrypted" view, dx key -> find in the browser to select the right view, dx key on the node of the component placed in that view, "include all surfaces". It can be that you have to do it for every view. I insist because I always do it and it works.

p.s. also works with transparent surfaces

I've done it for every view, it doesn't work that table doesn't update.

It is enough to exploit its potential with knowledge.
The logic is:
- I'll put the first view with the options I'm interested in [ hai notato che su complessivi complessi ( bel gioco di parole ) le filettature non le mette ? ]- I make derived views and these keep the characteristics of the original view.
- Is that okay?
- proceed
- I'm not okay with that?
- I put and remove the appropriate snacks and game of button dx.

Bye.

ok, but the component I replaced is not a thread, in the table before I replaced my component with the one sent by the customer there, then after replacing it this does not appear to me anymore!

but the strange thing is that I'm making a new table of this overall, inserting the overall in the table a component of this piece sent by the customer you already see without that I go to check the item "include all the surfaces" I don't know if I was quite clear. ok if after however select the item "include all surfaces" then the whole piece appears to me. Where's the catch? and then is it normal that a step file converted into iam and removed the translucent keep me the colors of the orange perimeter?

 

[Catafratto]

is it not that in the axieme the incriminated component is set to "refer"? I shoot what comes to my mind...

Besides, sometimes on big asses I have problems updating tables: I close and reopen, 99% goes all right.

orange borders remain such to me.

 

[gianlucap]

is it not that in the axieme the incriminated component is set to "refer"? I shoot what comes to my mind...

Besides, sometimes on big asses I have problems updating tables: I close and reopen, 99% goes all right.

orange borders remain such to me.

the component in the set is checked on default (normal).
Before canceling this morning I had tried to open and close yesterday but nothing.
bo, I tried them all, peace.
Thank you.