strange shape sheet development

[saralb]

Hello.
I have to develop a form similar to a tailor made motorcycle herb.
I used spape design.
I wanted to know if it was possible to develop the whole, or dividing them into parts, on a plan and then to print it with drafting and to quote it.
I have seen that there is the function develops inpiano, but not the never used and I cannot solve the problem

 

[yllo]

You can do it without any problem.

 

[saralb]

You can do it without any problem.

Well, could you tell me how please? ?

 

[yllo]

In synthesis on shapes, you must necessarily eliminate a face, possibly the face not visible, drawn an open surface, spread it .
the problem is the fittings.
as a second hypothesis and that of obtaining a mast, in polyurethane, on which to make the mold.
other hypothesis is using sheet metal create the sheet in context,(the rays in this case it is not possible to create them, however building the solid, with more flanges connected to the inside, realize the bulk ingots.
nb if it is a solid with more curves, the best solution is the master, then to get the negative-positive

 

[saralb]

Hi, I'm sorry if I haven't called you yet, for work reasons, it's easier for me to count you via forum.... .
I followed some of your directions, but I used the command develops on the floor, is the right command? ? ?

as soon as I can call you to understand better how to do for the master....

What do you use?? ...core&cavity design? ?

Thanks again

 

[yllo]

in short: if you slip on the floor a solid that has various rays and developments in multiple directions x-y-z lose practically all curves.

the best solution with shape and designer, with the photo as background,you can get the maestre, to make the solid cnc.
As soon as the solid is made of plastic & or wood, you can accurately extract the positive mould.

 

[saralb]

I understand the development problem.

I don't understand what you mean by

I'm sorry.
the best solution with shape and designer, with the photo as background,you can get the maestre,to make the solid to cnc......

What are the teachers?????(excuse but I don't know):biggrin:

I to get the negative-positive I created two solids (mould style) then on both I removed the piece by getting the two parts negative.

Is that okay? ?

 

[saralb]

Hello excuse me yllo if I recontact you now after a month. I had solved the problem at best, but now I have to solve another very similar one, but I wanted to understand how I could do using the master as you suggested.
I'll train you the tank I have to make.
from your explanation I realized that I have to make a master of the object, but then how do I have to develop in plan in order to cut the sheet of the right size and then work it? ?

Thank you very much for your help

 

[Elisabetta82]

Good morning to all,
I'm going to ask you for information, I should do the development (unrolling) of a sheet metal contact.
I should put it on drafting and quote it.I am not at all expert in the development of the sheets, if you can do, you could tell me (excuse, but in detail...) how to do?
graziw thousand for your help! !
Hi.

 

[ferrezio]

Good morning to all,
I'm going to ask you for information, I should do the development (unrolling) of a sheet metal contact.
I should put it on drafting and quote it.View attachment 34100I am not at all expert in the development of the sheets, if you can do, you could tell me (excuse, but in detail...) how to do?
graziw thousand for your help! !
Hi.

have you already shaped the part in sheet metal catia or have a file (step or iges) and you have to convert it then develop it?

Hi.

 

[Elisabetta82]

have you already shaped the part in sheet metal catia or have a file (step or iges) and you have to convert it then develop it?

Hi.

Good morning.
I have a step file I still have to convert it to develop it. the image proposed above was taken by an old drawing 2d.

thanks mile for availability! ! ! !

 

[mrwolverine]

Good morning.
I have a step file I still have to convert it to develop it. the image proposed above was taken by an old drawing 2d.

thanks mile for availability! ! ! !

Hi.
from the step file you can get the smd features via the "recognize".
if you have problems try to post the file.
Andrea

 

[ferrezio]

Good morning.
I have a step file I still have to convert it to develop it. the image proposed above was taken by an old drawing 2d.

thank you very much for the availability! ! ! !

see if this tutorial is enough for you. in the compressed file you can also find the step to repeat all the steps.

Hi.