structural calculation

[Giulio Vitali]

good morning and still good year to all...
... I would have an objective curiosity to solve. . .
....how can I do with creo 3 to calculate the hold of a closed ring or an open ring type hook...? ...with both geometry and material. . .

Thank you.

 

[Matteo]

Good morning, the question is a little generic: It would greatly help an image of geometry and a description of loads and constraints.

 

[Giulio Vitali]

First of all...thanks for the answer.. .
...cmq...I have to calculate, in traction, both the seal of a ring similar to that of a chain and the seal, always in traction, but here also subdues the bending of an open ring...the geometric shape is like that of a hook... attach image. . . ...I'll ring again.. .

 

[Matteo]

I have no clear vision of the system to simulate, but at first glance, it seems that critical points can be:

- contacts
- the bond of the components of the axieme so as not to interfere with the transmission of the forces, but at the same time eliminating the degrees of freedom

In summary: it is a complex simulation, which requires good practice with simulated/promechanic creo and a certain experience in simulation in general.

what I can do through the forum, is to give the availability to solve the problem step by step in this thread, but it would be necessary to publicly share geometry and phases of the simulation.

 

[Giulio Vitali]

ok... but I know how to share... I am trescore b. prov. bg...... if necessary I move and then we settle. . .
Thank you. .

 

[Matteo]

to share I intend to publish on the forum images, data, loads, etc., within the limits of the need for confidentiality: the forum is public and can give a lot, but it is right that knowledge is shared.

If you think private advice may be useful, we are in the field of professional performance: on the forum (and in this section especially) moderators and many users are fem and cfd analysts.