structural section elements variable

[camoz87]

Hello, everyone!

the situation is this: I created a guide profile and I set as a structural element a 40x40 tube. in a part of the guide path I would like to change the section to 40x50 and then return to the previous section.

Do you think it's possible to do it directly with this command?

Thank you.

 

[MassiVonWeizen]

the ideal would be to have an image, but to the nose the answer is
No.
must be done with the loft command

 

[camoz87]

the ideal would be to have an image, but to the nose the answer is
No.
must be done with the loft command

Okay, here's the picture. all section 40x40 except at the hole height which is 40x50. Thank you.

 

[MassiVonWeizen]

You're wrong to model. from the image it seems that the profile is a body suit when instead it should be divided and then welded. in this case, the image helps as always to understand the problem, the thing is possible by doing two structural member functions

 

[camoz87]

You're wrong to model. from the image it seems that the profile is a body suit when instead it should be divided and then welded. in this case, the image helps as always to understand the problem, the thing is possible by doing two structural member functions

I confirm that I have temporarily realized a solid to make understand the result I wanted to achieve. Now I try with your advice. Thank you!