• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

summary box in table

  • Thread starter Thread starter SciupaFerro
  • Start date Start date

SciupaFerro

Guest
Greetings to everyone.
I have a problem that I can't solve:
in the drw of a set I created a table and I inserted in a cell the sum of a column, can I recall the parameter generated by the sum function in the drw reports to do operations?
Thank you.
 
Good morning.
No trouble, I hope I'm wrong, but for me, if I understand what you want to get, you can't do it.
 
In the table you can't do it, but there would be another solution....:smile:
 
SciupaFerro said:
How do you do to know more? Is it possible to have a clue?
Click to expand...
Wait till I pass my iban ch78 5454 4654 56231:finger:
I'm kidding. . .
I wrote you so because it depends on what your intent is, if you explain it better maybe I can give you more clues.
 
When I know your iban, I can also take :biggrin:

My problem, summarizing, is this:
I have a set composed of many details which contain numerical parameters a, b, c.
I would need to know the total value of a*quantity, b*quantity, c*quantity. based on their value, I have to make decisions through relationships.
In the drw of the together I can get a table with the values that interest me, but I can't put them in the relationships to be able to process them.
 
I hope so.
is the time in Switzerland good?
Have you found some time to think about a solution to my problem?
Thank you, and good work.
 
opps. you notice so much :mad:? I'm sorry, but war is war and I'm willing to do everything. or better, almost everything.
 
SciupaFerro said:
I hope so.
is the time in Switzerland good?
Have you found some time to think about a solution to my problem?
Thank you, and good work.
Click to expand...
Let's say I've been through better times, Dr. Sciupaferro. :wink:
It's not that I haven't found time to think about the solution, I have the solution in my head and it works too, only I don't have time to explain it. . You asked?
DANI-3D said:
We're a little rough he.
Click to expand...
No but what do you say...:wink:
 
Good morning, how are you doing? I should have done it myself, but I just learned that there is a problem in production and that the workshop will work and my boss has decided that you can't leave the technical office desert, so a jerk must be present, of course I.

I am sorry for the rash, but my intervention is due to the fact that I have as the feeling that this discussion langua, which did not affect the interest it deserves, that it is channeled into a dead track.
I hope I'm wrong.
Greetings.
 
hi sciupaferro, first of all thanks to the raga, it was a piece that I didn't hear it. then compliments for the breath of joy you brought, said among us, wanted us.
SciupaFerro said:
I have as the feeling that this discussion languages, that it did not affect the interest it deserves, that it is channeled into a dead track. .
Click to expand...
I'm sorry, but I confirm that I have this feeling, too.
probably is a difficult problem.
 
♪ I don't know ♪
SciupaFerro said:
Good morning, how are you doing? I should have done it myself, but I just learned that there is a problem in production and that the workshop will work and my boss has decided that you can't leave the technical office desert, so a jerk must be present, of course I.

I am sorry for the rash, but my intervention is due to the fact that I have as the feeling that this discussion langua, which did not affect the interest it deserves, that it is channeled into a dead track.
I hope I'm wrong.
Greetings.
Click to expand...
Well, as I've already written to you in private, I understand that you want to look good towards your boss and it's all about it, but it's just right to say things out of your teeth.
I will not help you in principle (but not because you are antipatic or because I want to do you wrong..), but only because I am tired that others take the merit without raising a finger and reveal the solution as if it were flour of their own sack and as usual to me remains only a thank, that it always makes me like it would miss us, but that the others (competitors above all) lucrano on my solutions unfortunately I can not accept

Bye-bye
 
I'm sorry I pissed you off, it wasn't my intention, I realized you wouldn't help me, and I was hoping for help from others.
However, if you don't need a thank you what you're trying to do on the forum, or you really want money.
I am surprised that by reading many previous discussions you were much more collaborative. Boh!
I also believe it is normal to do everything to learn and improve your position.
I would like to ask the moderator to close this useless debate.
 
SciupaFerro said:
I'm sorry I pissed you off, it wasn't my intention, I realized you wouldn't help me, and I was hoping for help from others.
However, if you don't need a thank you what you're trying to do on the forum, or you really want money.
I am surprised that by reading many previous discussions you were much more collaborative. Boh!
I also believe it is normal to do everything to learn and improve your position.
I would like to ask the moderator to close this useless debate.
Click to expand...
Bye!
ozzy certainly does not need to be defended, much less by a neophyte like me!
But believe me, he's very cooperative!
read this discussion that concerns me personally: in the end I stayed at the point where I arrived, but this does not mean that he was not collaborative, indeed....http://www.cad3d.it/forum1/showthread.php?t=28130If you're looking in the open discussions from me, you'll see that there are at least a couple without answer. ..patience, it will mean that the subject was not of interest to others, but I cannot claim that someone answers me.
When I read these statements I am definitely perplexed, and I don't think the sense and purpose of the forum has been understood!

greetings
 
tartufon, what you say does not bend, but a speech like this:
Parametric_Ozzy said:
:wink:
but only because I am tired that others take credit without raising a finger and reveal the solution as if it were flour of their own sack and as usual to me it remains only a thank, that I always enjoy it would miss us, but that the others (competitors above all) lucrino on my solutions unfortunately I can not accept it anymore, it has happened already too many times and I do not want to piss anymore, I hope you will understand without rancore.
Click to expand...
It sounds weird, even because I didn't understand it all the way. Who are the competitors?
 
SciupaFerro said:
I'm sorry I pissed you off, it wasn't my intention, I realized you wouldn't help me, and I was hoping for help from others.
However, if you don't need a thank you what you're trying to do on the forum, or you really want money.
I am surprised that by reading many previous discussions you were much more collaborative. Boh!
I also believe it is normal to do everything to learn and improve your position.
I would like to ask the moderator to close this useless debate.
Click to expand...
I see you don't understand the meaning of the message, I try to get back and say things as they are:
I told you that the solution I have, but I also asked you expressly if you had first asked the dealer that follows you currently, you answered me that your boss asked but didn't receive an answer and you also told me that with the dealer you couldn't talk to us because your boss was very jealous, but that the solution could make you very comfortable to make you look good in the office since you recently work there and I repeat it doesn't make a turn.
so I read it like this:
If you had given yourself the solution, you would have taken it and resold to your boss as if it had been flour of your sack (if you wanted to make a good figure...), surely since you work recently I don't think you would have said:
Look boss, there's been a good person who helped me and it's also a retailer, are you sure that the dealer who follows us is currently up to the situation? What value does it give us?
you wouldn't have done it (and I understand it perfectly) simply because now you're in a position where you're not allowed to do it, you just want to grow and increase your credibility towards your boss, so your boss would never have come to know this and could not tell his current dealer:
andi never how and how you are unable to give us a hand (which we pay you as well) and another managed without getting paid a penny?
moral:
minimum effort... Everyone wins.. you, your boss and his dealer... Ozzy? Who the fuck is that?
So here you are not talking about money, I do not do it for this, I do it for the same reason that you have emphasized, increase my credibility, my not that of other retailers, to make it clear to the leaders that it is not only enough to pop up some more percentage point at the end of the year on the software to lower the costs, perhaps if you would concentrate more on the real value that a partner can give you then the speech would radically change.
I am not pissed at you, people I have helped and will continue to help them but there is always a limit to everything especially when I see that on the other hand you think only of your own credibility and never of the one who helped you grow. . .
with estimation and without anger
greetings
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top