surfaces?

[MICHELE77]

hi to everyone I'm trying to draw a wing terminal.Continues to give me errors and tells me that geometry is not uniform when I try to create a blusurf.
Who can help me use the v20??? tell me if I'm using the right system or if I'm wrong?

thanks to all for the help hello michele

 

[siou]

Hi, I added to your sketches a third guide curve. I don't know if that's what you meant.
Say hi.

 

[siou]

I'll give you a second example.

 

[MICHELE77]

So you simply added a guide curve to the bottom, didn't you? Without putting that, it was not possible to build the piece?
Could you post the file?

thanks for the help hello michele

 

[siou]

you place pictures landscapes:
- I took out your sketch #4
- created guide curve (alar terminal)
- created cross section curve (the previous sketch n°4)
nb when I click the front sketch to create the bluesurfs I use the single mode instead of chain and I avoid the curves that interest me.
here we talk about surfaces:http://www.geocities.com/segurucool/
ciao

 

[MICHELE77]

hi I tried but I can't create blue surfing, what selections as a single sketch?

 

[MICHELE77]

hi I tried but I can't create blue surfing, what selections as a single sketch? in which order I have tried them a thousand times but continues to give me error. It tells me that the geometry does not touch all sections or that the selected geometry is not uniform!
help!

Thank you.

 

[siou]

curves for cross selection:
- Front disc single selection
-schizzo 4 chain selection
- Front disc single selection

curves for driving curves:
- Skull 6
- scrap 7
-low part scrap

 

[MICHELE77]

I'm sorry, I feel very hard, but I just can't count the mistakes. I try to post the part, did I miss something when I redefine the missing section? ?

Thanks again

 

[MICHELE77]

Maybe I realized there was some problem on the sketch. Now I managed in part does not accept the driving curve (schizzo 11)cxome ever?? then when I try to solidify it giving a thickness gives me an error. I think it is because it did not take the sketch11.
What do you say? I always attach the file.

Thank you.

 

[siou]

I am not very experienced so I gave you unpretentious indications to help you. I place you as I drew sketch 11. in other discussions other users advised, to simplify things, to draw only one half and then mirror it.
Hi.

 

[MICHELE77]

hi I still did some tests, I fixed the sketches since I had done them to the eye. Now it gives me problems on the sketch6 and sketch 11 when I use them as guide curves!I don't understand why. I attach as usual the file, although I confess it would be interesting that someone expert on surfaces helped us understand where the error is!
Now it seems like an open disussion only between me and siou!

Thank you.

 

[siou]

add tangenza relationship to wings sketches 6 and 11.
Hi.

 

[MICHELE77]

OK after lunch I try but I don't think I understand how you do. You have to give a reward for your patience! !

Thank you.

 

[MICHELE77]

How did I imagine that I did some evidence, but I don't understand what you mean?

thanks michele