table-part link

[bradipo666]

hi raga a couple of questions:

1) Can you change the size of a hole in a table view without automatically reflecting in the part/axieme?

2) Can I change the size of a hole in a set or part without automatically reflecting in the table? I tried by popping up in "application options --> together --> postpone update" but when I change the part, returning to the table updates me automatically

Thank you.

 

[davide75]

What do you need this for? It seems to me a countersensus against the logic of the cad

 

[MauroM]

....can you change the size of a hole in a table view without automatically reflecting in the part/axieme?
Thank you.

use autocad instead of inventor:::biggrin:

 

[bradipo666]

So, I press that I am not mechanical or engineer, I try to explain how best I can: I created a .idw of a part, I have to convert it to a dwg file that I will send to the cut. I have a hole of 10 mm (h8) with overhead. I would not want that, once sent the dwg to the workshop for the processing, those of competence, opening the dwg and listing the hole, I went to cut the part with a hole of 10mm (see the high cost of the piece-about 5000€) :biggrin:

 

[MauroM]

Sorry, but at this point, put your hand directly to the dwg before sending it to the workshop.
or your question is: how do I get the dwg for laser cutting without the work?

 

[bradipo666]

you are right maurom, I think I will convert to dwg and I will edit it with autocad... .
I almost forgot: Can I change the size of a hole in a set or part without automatically reflecting in the table? ?

 

[arzigogolo]

you are right maurom, I think I will convert to dwg and I will edit it with autocad... .
I almost forgot: Can I change the size of a hole in a set or part without automatically reflecting in the table? ?

Hi, bradipo!

you can do it. If I have understood the problem well, you should be able to get your purpose simply by popping up on the "newspot" option that you find in the "document settings" window -> "shower updates".By doing so, any changes you make in the model will no longer automatically reflect when you pass or open the drawing file (.idw), but you can decide when to do it, only manually, by clicking on the lightning icon at the top left on the menu bar near the "Save" command.

I don't know if I do your own thing, but you can try.

Bye.

 

[arzigogolo]

Hi, bradipo!

you can do it. If I have understood the problem well, you should be able to get your purpose simply by popping up on the "newspot" option that you find in the "document settings" window -> "shower updates".View attachment 27104By doing so, any changes you make in the model will no longer automatically reflect when you pass or open the drawing file (.idw), but you can decide when to do it, only manually, by clicking on the lightning icon at the top left on the menu bar near the "Save" command.

I don't know if I do your own thing, but you can try.

Bye.

I forgot: the voice "postic updates" you have to poke in the table putting (.idw) under "application options" and non in the same voice in "assieme" mode (.iam).

 

[davide75]

according to me cmq do first to put a note on the diameter of the hole in question directly on the idw and if you want to be quiet you also put the note directly on the model. If you do other updates and do not throw them there is a risk of making mistakes.

 

[bradipo666]

That's probably where I was wrong. I have popped up "pants update" in "app-->assieme" option!! now is ok thanks arzigogolo :finger:

according to me cmq do first to put a note on the diameter of the hole in question directly on the idw and if you want to be quiet you also put the note directly on the model. If you do other updates and do not throw them there is a risk of making mistakes.

I think I'll do it this way, it seems to me the easiest thing thanks:biggrin: