threaded bolts and nuts

[lelef77]

Bye to all,
I would have the need to draw a steel plate with 4 holes, in these 4 holes I should pass 4 threaded bolts and on the opposite side insert the relative dice...
Can you tell me where I can recover a library containing nuts and bolts?

Thank you.

 

[MassiVonWeizen]

It doesn't seem difficult.https://www.google.it/search?q=bull...=cr&ei=73gzvdn2jmivuyzyo_gb#q=bulloni+tabellehttp://www.oppo.it/tabelle/a_elenco_tabelle.html (in the background page)

 

[meccanicamg]

attention to definitions.
nut: rectangular or hexagonal body or other shape with threaded hole.
screw: threaded male body with head for tightening maneuver.
bolt: together with a screw plus a nut.

then for the rest there are numerous sites that give libraries or pdf catalogs.

 

[lelef77]

I'm sorry, I've explained badly.
I think they're called blocks.

this for 2 reasons
1) for not having to draw every time what I need
2) to have a standard of measurement that is unique.

use nanocad..

I have already found something but at the end I would need threaded screws and dice in the various sizes.
Can you help me?

 

[numero1]

always from the opposite site that has already reported massive:http://www.oppo.it/disegni/bulloni.htmlor just use this search string:https://www.google.it/search?q=bull...ei=73gzvdn2jmivuyzyo_gb#q=blocchi+cad+bulloniand a world opens to you.
but do you want them already or do you have to create them, as I mean, they have to be 2d or 3d, apart from the plate, what else do you have to do?
Hi.

 

[lelef77]

Actually at the moment only the plate in 2d, but I would like to have the possibility to try various types of screws, type to hexagonal head, vased etc.. How is the google string? I don't get what you posted.

 

[lelef77]

I know what I need... .

a bolt made with a dynamic lock... I found something on google.. but it was hidden well, for the moment I only have the hexagonal head bolt, I would also need the one with a head and a brugola. .

I didn't even know there was a chance on the cad...

from what I understand, with this function it is possible to have only 1 bolt by type and subsequently to decide the measurements... Do you confirm what? :

Thank you.

 

[MassiVonWeizen]

with nanocad non so, with autocad if

 

[lelef77]

I also driftsight,
and various free cad, cmq what I found works also on nanocad...
Are these dynamic blocks already inserted on autocad? Maybe on the mecchanical version?

 

[MassiVonWeizen]

in mechanical you have a very wide library of unified elements.
but give a look at how the program works and what you can do with it, look at the guide every now and then or you limit yourself to pulling lines?

 

[lelef77]

clearly the second you said.... ahahahhah

No, except for the jokes, unfortunately I don't have the mechanical... I'm not a cadist, I'm just using it for basic drawings. . this time I had to draw bolts I thought maybe there could be a simpler and faster way to do it without having to draw them from me.... and then I asked

 

[MassiVonWeizen]

Unfortunately I do not have the mechanical

from the way you asked the question seemed to put it, from here the answer.