tirematic system expert

[batleo]

hello to all tire press are just above zero, cmq chissa if there is someone who can help me, I have to realize a small plant I try to explain, the project is very simple
1) arrives compressed air
2) passes for various fittings and about 4 or 5 m tube
3) I have a room connected to a valve that should open to about 4bar (and until here I arrive)
the problem is not having familiarity I don't know what valve to choose , because you have to open and let go "explosive" the pressure not spurious type to understand us, my client asked me 2 versions either with automatic valve si manual version but in this case I put a tap and should be affixed.
I found this valve (see attached ) can you tell me if it fits for what I have to do?
Thank you in advance.

 

[MBT]

hello to all tire press are just above zero, cmq chissa if there is someone who can help me, I have to realize a small plant I try to explain, the project is very simple
1) arrives compressed air
2) passes for various fittings and about 4 or 5 m tube
3) I have a room connected to a valve that should open to about 4bar (and until here I arrive)
the problem is not having familiarity I don't know what valve to choose , because you have to open and let go "explosive" the pressure not spurious type to understand us, my client asked me 2 versions either with automatic valve si manual version but in this case I put a tap and should be affixed.
I found this valve (see attached ) can you tell me if it fits for what I have to do?
Thank you in advance.

However, the vsr valve is "automatic", in the sense that if there is no power supply in 1 it automatically and quickly puts in communication 2 (sewer in your case) with 3 (external environment).
It is true that it is "explosive", but also here it is necessary to understand what you mean by "explosive"... but don't hold! ?

 

[il teo]

test to see membrane valves (turbo srl, asco, smc, etc.).
I use them for the countercurrent cleaning of industrial filter cartridges at 7 bar.
They're shooting it.
I don't know if there are any sizes you need (which you don't say).

 

[batleo]

thanks for the straights, for "explosive" I mean that if at the entrance of the valve I have 4 bars constant at the opening of the same must pass in a very short time and without pressure loss.
I try to look at the diaphragm valves indicated by - the theo- which I thank by chance do you have any links for the steps?
ops apologizes for now is still in sizing phase, so I have a little margin

 

[batleo]

and it's just what it takes to "sword"

 

[MBT]

thanks for the straights, for "explosive" I mean that if at the entrance of the valve I have 4 bars constant at the opening of the same must pass in a very short time and without pressure loss.

for the very little time and pressure losses, I think the vsrs can go well.
so much to give you an idea, this 1/2" festool brings 6500 l/min from 6 to 0 barhttps://www.festo.com/cat/it_it/products_se_seu?currentpartno=9685remains the doubt of the "command", because the vsrs cannot be commanded
could in this case be useful one of these:https://www.festo.com/cat/it_it/products_hglbut if you're going to "slide", try to see these here.https://www.festo.com/cat/it_it/products_vzwe

 

[batleo]

thank you 1000 for the links, too efficient:wink:

 

[MBT]

thank you 1000 for the links, too efficient:wink:

Please, do we send the iban or do we match the vauchers? ?

 

[batleo]

Do you accept chocolate coins?

 

[MBT]

Do you accept chocolate coins?

only if hand forged by willy wonka in person in barad-dùr forge

 

[batleo]

hi mtb I tried to contact Mr. Willy wonka but told me that he is retired and does not do these things anymore