transforming together into a unique part

[EDU]

Good morning. First I apologize if I'm not explicit or if I'm wrong with spelling - I'm foreign.
I have a set, which I have to send to the client. I would like to turn the axieme into a unique part (about 200 parts) so that the customer can not see the individual parts, or that can copy them. I tried with the union command, but with so many parts it does not. it does with 1-2 parts (I did the test). If you can suggest something, I would be very grateful.

 

[EDU]

creo modeling version 18.1

 

[Kaji]

in my opinion the union did not take place for two possible reasons:

- the parts that have not joined do not touch
- alune parts are non-changeable objects, for example library objects

 

[EDU]

Thank you kaji. but the road and that taste, according to you?

 

[EDU]

It does not even if there are shared parts. go cancel all the shares and a mess. We want another strategy. :

 

[reb_bl]

It does not even if there are shared parts. go cancel all the shares and a mess. We want another strategy. :

make a step, echo it and join the various parts.

 

[EDU]

Thank you very much reb_bl. I made the step, loaded the step, I get the error (Annex)

 

[rero]

try to make a shrinkwrap and then from the prt you get do the step

 

[EDU]

I'm talking about creo direct modeling version 18.1, former cocreate. in rescue options do not shrinkwrap .

 

[rero]

scusa thinkvo was come creo parametric 3.0

 

[reb_bl]

Thank you very much reb_bl. I made the step, loaded the step, I get the error (Annex)

try to check if you still have shared objects in the step

 

[EDU]

si, ci sono.

 

[reb_bl]

si, ci sono.

then is that the problem, if it is so much stuff try to export everything instead of in step in sat, in fact I do not remember now if modeling has default the translator, if it is little stuff I would tell you to copy to 1 level, in order to make them not more shared, then it makes you all the unions of the case (always as long as the faces twist)

 

[EDU]

Thank you very much reb_bl. I try today, and I tell you.

 

[EDU]

 

[reb_bl]

test with iges

 

[cacciatorino]

the sat should be there, but I doubt you will find something useful to your purpose.

 

[EDU]

Nothing. after so many attempts and trials, I surrender. I thought, is it not possible to use the street of faces?

 

[and]

to send a group to a client without him copying math 3d you can use the format of creo view mcad (*.pvz)
the customer must use creo view that can download from the ptc site to free.
and so it only has the viewable without math....

 

[EDU]

thank you very much and. and a good solution