tree motor

[kikko27]

Slave to all, I make you in advance the apologies I have to say a few buoys, I am a fan of mechanics and work I do the lathe on cnc machines, I look for a long time unquoted assembly or single anke in a multi-fractioned motor tree (until v10,un v6 would be ideal).iml reason is that I would like to make one on a reduced scale.

 

[athlon]

http://www.youtube.com/watch?v=tjhvh9qa5jy Unfortunately it's not a design but you can contact who uploaded this (and other videos) to send you some info, if you look at the connected videos there are many examples

 

[mariom]

Hello
I found, on an old text book, the design of a 4 cylinder motor shaft.
I could post it in .pdf, but moderators should tell me if I can do it, or if there were any problems, as being scanned it would be a photocopy.

 

[kikko27]

Hi.

thank you so much I could go well. If you can put it too.grazzie thousand more

 

[mariom]

attached you will find the two drawings of the engine shafts of two 4 cylinders.
a v without counter media. and one in line with three counter supports.
They're monolithic.
I hope they can serve for your project.
if you use them as construction post at least a photo of the worked piece.

 

[kikko27]

attached you will find the two drawings of the engine shafts of two 4 cylinders.
a v without counter media. and one in line with three counter supports.
They're monolithic.
I hope they can serve for your project.
if you use them as construction post at least a photo of the worked piece.

Hi.

thank you very much. was propio that I was looking for.thank you very much.at finished work and during I will definitely post you the photos.
soon

 

[kikko27]

attached you will find the two drawings of the engine shafts of two 4 cylinders.
a v without counter media. and one in line with three counter supports.
They're monolithic.
I hope they can serve for your project.
if you use them as construction post at least a photo of the worked piece.

I'm sorry if I bother you again, could you do me a favor if you can? You should give me the photo of the 4 with supports because some odds do not echo to detect them being a little blurred! thank you very much:finger:

 

[mariom]

Hi.

That's the best I can do, we hope you're helping.

 

[Er Presidente]

Hi.

That's the best I can do, we hope you're helping.

Dude!
then put that spear at high resolution too?

Hi.

 

[mariom]

Hi.

This is the original scan I hope you see better.

 

[Er Presidente]

Hi.

This is the original scan I hope you see better.

Thank you!
should be the motor shaft of the alpha diesel "fantasmagorico", a noisy and heavy perkins installed on the giulia.

 

[Exatem]

They are tables taken from a drawing book that I have also since the school and that I "register" a prof. does not come to me the name of the author but I have the volumes in the office.

 

[Mike1967]

Hoepli peacekeepers?

 

[mariom]

Hi.

the second scan should be that of the 4 cylinder shaft of the fulvia lance, the one to v of 13° (the one without bench supports).
the book is : design, design and industrial organization vol. 2 of s.l. straneo and r. conserti (I used it in superiors )
I also found a design of a 12-cylinder engine shaft for aviation from a 1964 book as soon as I can place it....

 

[Exatem]

Hi.

the second scan should be that of the 4 cylinder shaft of the fulvia lance, the one to v of 13° (the one without bench supports).
the book is : design, design and industrial organization vol. 2 of s.l. straneo and r. conserti (I used it in superiors )
I also found a design of a 12-cylinder engine shaft for aviation from a 1964 book as soon as I can place it....

Well, that's the weirdo.
a small ot.
Monday, I get a technical drawing manual from 1901.

 

[Er Presidente]

Hi.

the second scan should be that of the 4 cylinder shaft of the fulvia lance, the one to v of 13° (the one without bench supports).
the book is : design, design and industrial organization vol. 2 of s.l. straneo and r. conserti (I used it in superiors )
I also found a design of a 12-cylinder engine shaft for aviation from a 1964 book as soon as I can place it....

I confirm, the spear is 4 cylinder v tight.

I don't know how to tell you, I'll take it away.
you have family, I guess, and you enjoy good health I hope.. .

p.s.: We understand each other, don't we?
:smile:

 

[Exatem]

I confirm, the spear is 4 cylinder v tight.

I don't know how to tell you, I'll take it away.
you have family, I guess, and you enjoy good health I hope.. .

p.s.: We understand each other, don't we?
:smile:

come no????

 

[Er Presidente]

I ordered a couple of tickets to the north, the "boys" should be on your side for tomorrow.
they don't have advanced technologies, to find you they will take 2, maybe even 3 hours.
When they come, be kind and, I recommend, don't offer them coffee, caffeine makes them nervous. .

:biggrin:

 

[mariom]

We have certain artifacts here too
this is the design of the engine shaft of a 12 cylinder.

 

[Er Presidente]

We have certain artifacts here too
this is the design of the engine shaft of a 12 cylinder.

I'd say it's a damler db-601 on alpha romeo license.
I'll deepen.

p.s.: we say that "we" managed to make them stay at the airport, but if the file was higher than the two "mega" I could also pay him the return ticket (to have them around the province would not be healthy).
:biggrin: