daniele rubis
Guest
Can the whole plastic work for you or print it? of course if properly dimensioned
PIETRO2002
Guest
if it's to make a prototype with medium/small size definitely yes, on the site that showed you mechanicalmg also sell plastic gears.
If it has to turn slowly, in place of the desired bearings you can put plastic shading compasses like igus.
but sincerely seeing plastic trees makes me a little cry my heart...
Sorry about my curiosity, what do you have to do with it? ? ?
If you don't answer me, is that some secret object?
If it has to turn slowly, in place of the desired bearings you can put plastic shading compasses like igus.
but sincerely seeing plastic trees makes me a little cry my heart...
Sorry about my curiosity, what do you have to do with it? ? ?
If you don't answer me, is that some secret object?
daniele rubis
Guest
I have to build a small model of a windmill more or less 40 cm high
PIETRO2002
Guest
If your goal is to turn it around and don't worry about the duration, effort, etc., everything can be fine.
I would acquire plastic gears, both conical pairs and cylindrical gears.
I would make them turning aluminum.
various supports for plastic printed trees.
I wouldn't know how long you need.
the outer part of the mill (the carter) printed in plastic prepared with the various holes that take the internal supports.
If drawn well it can work.
paying attention to calculating the various games to give, according to the precision and the retreats that the 3d printed pieces have!
I would acquire plastic gears, both conical pairs and cylindrical gears.
I would make them turning aluminum.
various supports for plastic printed trees.
I wouldn't know how long you need.
the outer part of the mill (the carter) printed in plastic prepared with the various holes that take the internal supports.
If drawn well it can work.
paying attention to calculating the various games to give, according to the precision and the retreats that the 3d printed pieces have!
daniele rubis
Guest
OK thank you very much I will reason on this
MassiVonWeizen
Guest
So I know I'm polemical, but...
Daniele, you start with a very generic question, then you go out with two images, which you don't explain, and there's no need to do with the first question, then make a scheme that with your previous interventions has only the word trees in common.
You're going to have to do the non-plastic project.
then it is a high mill 40cm
in the middle there are laconic "ok" "I think about it" ', perhaps it is the case that you elaborate well a request that has all the information and, above all, that you actively participate in the discussion.
here you will find experts who don't mix advice and knowledge, but that doesn't mean that all of his due!
For me this is a one-time school project that must last the time of the presentation and do just a dozen turns, so all speeches of duration, efforts, size bearings and beautiful company in this case makes no sense.
by the way we don't even know what your skills or studies are, and already who speaks of mechanics in cm makes me shiver
Daniele, you start with a very generic question, then you go out with two images, which you don't explain, and there's no need to do with the first question, then make a scheme that with your previous interventions has only the word trees in common.
You're going to have to do the non-plastic project.
then it is a high mill 40cm
in the middle there are laconic "ok" "I think about it" ', perhaps it is the case that you elaborate well a request that has all the information and, above all, that you actively participate in the discussion.
here you will find experts who don't mix advice and knowledge, but that doesn't mean that all of his due!
For me this is a one-time school project that must last the time of the presentation and do just a dozen turns, so all speeches of duration, efforts, size bearings and beautiful company in this case makes no sense.
by the way we don't even know what your skills or studies are, and already who speaks of mechanics in cm makes me shiver
daniele rubis
Guest
My skills in this matter are very narrow because I am a high school student and I apologize for my ignorance in the future better
MassiVonWeizen
Guest
@daniele rubies How did this project end?
daniele rubis
Guest
I managed to build it with plastic parts wooden parts and some iron is working but I can not take a photo but it is only thanks to you if I managed to build it.thanks a thousand