university project

[Reynolds vs. Grashof]

hi shiren... we tried to imagine how the forming cycle would be with the solution you proposed and we made a sketch attached. Is that right?
Thank you.

 

[SHIREN]

hi shiren... we tried to imagine how the forming cycle would be with the solution you proposed and we made a sketch attached. Is that right?
Thank you.

View attachment 36983

Hi.
then I displayed your attachment
for those who know about foundry it's easy to understand the sketched solution

I train you another sketch
where a first phase is indicated
Bracket with inside the model fills the sand
second phase
turn the shuffled bracket with the model inside
eliminate the fake flow
put another bracket centered on the previous
styping the sand
open the two brackets
the model is extracted
close or mate the two brackets
♪
missing the casting bay
that is another prob that we see ahead
force boys:finger:
Thank you very much

 

[SHIREN]

http://www.unibg.it/dati/corsi/228509/31038-fonderia.pdfdate na watched
changes the model but the system and the same

 

[Reynolds vs. Grashof]

the model is extracted

hi shiren... we understood the two phases you designed; but once you open the two brackets how can you extract the model without eliminating the sand contained in the concavity?
Thank you very much

p.s we have seen the material you have suggested but it is almost a copy of what gives us the professor and on the internet well or bad always turn the same glosses similar to those you have suggested

 

[SHIREN]

hi shiren... we understood the two phases you designed; but once you open the two brackets how can you extract the model without eliminating the sand contained in the concavity?
Thank you very much

Hi.
I'm not disappointed!!!!!!!!!! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
I train you another sketch

 

[Reynolds vs. Grashof]

hi shiren....sorry if we didn't get understood in the design that we had done but good or bad your last attachment was what we wanted to sketch. we thank you again for the help you are offering; We keep working on it and we'll get you back.
Thanks again

 

[SHIREN]

hi shiren....sorry if we didn't get understood in the design that we had done but good or bad your last attachment was what we wanted to sketch. we thank you again for the help you are offering; We keep working on it and we'll get you back.
Thanks again

Hi.
it would be good that you would start "in the beginning" to draw up a mathematical model
because only with drawings3d / 2d views and various sez
you have complete view of what you want to get
Now what you have to do, we've been out of the blue
start drawing
Thank you very much

 

[Reynolds vs. Grashof]

Bye to all,

cause more examination we have somewhat neglected the project in recent times. in the next few days we will begin with calculations related to casting channels, materozzes, etc. and we will update on what we have done. we have a question that only you who work with us daily can solve: how much would a wooden model cost the size of the shovel (211x165x43) taking into account parameters such as working hours, labor time cost, raw material cost?

thank you again to all and... good game!

 

[SHIREN]

Bye to all,

: how much would a wooden model cost of the blade size (211x165x43) taking into account parameters such as working hours, labor time cost, raw material cost?

thank you again to all and... good game!

Hi.
The game is gone!!!!
I'm not a commercial anyway
the cost of a wooden model can also vary by 50% more or less
depends on the time, the working relationships they have with the customer
If you already have work or not, etc.
we say that to make the quote we put in a commercial area "off topic"
drawing of construction
drawing of a track with rites and svmetals
we estimate 40 hours of living work hand at 50€ =2000€ including construction model surface finish and painting
the finish and painting must be of excellent invoice take you away 8-12 hours
for the material to use cirmol wood essence or pynocyrmolate essence cost to m.cubo 500/600 € to the supplier
there's very rough big way a good 50% in building a model is realistic to anticipate 200 €
you have to add a 20% general expenses that make other 440
and then a 10% profit and we are at 264€
tot. 2900€

discount payment at delivery 5%:hahahahah:

we say that could be realistic
even if for various situations reality could be different
Thank you very much

 

[marcof]

we estimate 40 hours of hands of work alive to 50€ =2000€

ok, I am already organizing the move and I am catapulted to work from your parts, before the prices fall to an unfair 45€ now :smile: !

 

[Reynolds vs. Grashof]

2900 euros to make 4 palettes are beautiful
a few days ago we had contact with a company that produces polystyrene models to have a comparison and we had asked for a quote; we arrived yesterday the answer and they said that between one thing another the unit price per model is 150 euros for a total of 600 (it would be applied also 10% discount on an order of 4 pieces :finger. perhaps for our needs, even to maintain the costs contained, would be more indicated a model to lose (we also save time on the drafting of the part relative to corners of soform etc... we also save on the height of the brackets and on the earth) without diminishing what you told us about the false reach

 

[marcof]

... how much would it cost a wooden model of the blade size (211x165x43)

....
The game is gone!!!!
....
for the material to use cirmol wood essence or pynocyrmolate essence cost to m.cubo 500/600 € to the supplier
There is a very rough way a good 50% in building a model is realistic to prevent 200 €

shiren, I understand that the result of the game has slightly upset you:smile:, but there is no humming to consume a third of cubic meter to make a model of that size (but they were also four) . you want that there is a waste, but even if of models it is wrong ten in a row you need all that wood!
I said football hurts. :redface:

 

[MassiVonWeizen]

with the cirmolo you make a great grappa, maybe the discard should not be thrown away...

 

[marcof]

with the cirmolo you make a great grappa, maybe the discard should not be thrown away...

the hamster with the cured hamster?

 

[MassiVonWeizen]

ah not if he was aged, but he was certainly great.

 

[marcof]

ah not if he was aged, but he was certainly great.

I saw that the grappa is really flavored with the lazy of the cirmol.
If instead you used the wood (which moreover has an extraordinary perfume...) with that quantity of waste hypothesized by shiren you would aromatize us so much of that grappa to satisfy the body delgi aplini for four generations :biggrin:

 

[SHIREN]

I saw that the grappa is really flavored with the lazy of the cirmol.
If instead you used the wood (which moreover has an extraordinary perfume...) with that quantity of waste hypothesized by shiren you would aromatize us so much of that grappa to satisfy the body delgi aplini for four generations :biggrin:

ah not if he was aged, but he was certainly great.

the hamster with the cured hamster?

with the cirmolo you make a great grappa, maybe the discard should not be thrown away...

shiren, I understand that the result of the game has slightly upset you:smile:, but there is no humming to consume a third of cubic meter to make a model of that size (but they were also four) . you want that there is a waste, but even if of models it is wrong ten in a row you need all that wood!
I said football hurts. .

Okay, I'm already organizing the move and I'm catapulted to work from your parts before the prices fall to an indecorous 45€ now

:hahahahah::hahahahah:
is a real evaluation
I remember that in italy we have a common member who takes a nice slice of the quote
I have to tell you a story
a technician made an intervention on a cn replacing a screw tsei m10x50
the client asked him what cost the intervention
technical chese 1000 €
the customer but as 1000€ for a screw
no said the technician
for screw 1€
to know how to make 999€

for cirmolo wood
500/600 € per mcubo are at the supplier
you have to take it home!!!! ! ! ! ! ! ! ! ! !
have some sheds to dry it and air
if you have a shed how much it costs to occupy a considerable part of space
that will make you between 2-3 years
paints with related funds for foundry models are specific products
have at least double prices of common kitchen furniture paints

Tell me what it costs to draw a mathematical model in 3d
what gives you the customer must be done to adapt it to the needs of foundry
and then make an executive track 1/1 with all the sez
with relative construction technology?????? ? ? ? ? ? ? ? ? ? ? ? ? ?

when it comes to polystyrene
It's different.
provide the mathematical model to the supplier
cost polystyrene irriso
model cost equal to cnc cost

but besides having huge tolerances in the specific case even more or less 5mm (the sum of which makes 10)
If you miss the fusion the model no longer exists
Thank you very much

 

[MassiVonWeizen]

I saw that the grappa is really flavored with the lazy of the cirmol.

You're right, mine was a poetic license.

If instead you used the wood (which moreover has an extraordinary perfume...) with that quantity of waste hypothesized by shiren you would aromatize us so much of that grappa to satisfy the body delgi aplini for four generations :biggrin:

Maybe it's the second one. putting limits on the thirst of mountaineers is like asking them to tell you when they are drunk.

 

[Reynolds vs. Grashof]

but besides having huge tolerances in the specific case even more or less 5mm (the sum of which makes 10)

from the chirone-torncasa we read from table that says that for a piece of our size the foundry in coarse land has tolerances ranging from +/- 0.5 to 7.2 mm; how is it possible that changing only the material of the model would have a tolerance almost close to the worst of the range of the foundry on earth?

If you miss the fusion the model no longer exists

since ours is only a pure theoretical exercise we say that it is not expected that fusion is mistaken

we have stopped to the grappa flavored with straw:smile:; the bug is to try!

 

[marcof]

ok, I am already organizing the move and I am catapulted to work from your parts, before the prices fall to an unfair 45€ now :smile: !

:hahahahahahahahah:
e' una Reale

Well, congratulations then!

for cirmolo wood
500/600 € per mcubo are at the supplier
you have to take it home!!!! ! ! ! ! ! ! ! ! !

shiren, I wasn't referring to the price of wood, but your estimate of how much it needed. . .