viti uni

[cesare_]

I don't have the solidworks toolbox and need to find models of screws and dice where I can find them?

 

[MassiVonWeizen]

on tracepart.com you find a world of stuff.
but maybe you're less on a part and configure it by table

 

[meccanicamg]

confirm, first draw the few feautures and configure them with xls table. then if you want you can turn them into smart parts and all that....even if you eventually need it a little.

 

[falonef]

confirm, first draw the few feautures and configure them with xls table. then if you want you can turn them into smart parts and all that....even if you eventually need it a little.

Hi.
What do you mean by "intelligent" parts in solidworks?

 

[meccanicamg]

for "intelligent" parts in dolidworks are those parts that are modelled by imposing magical self-adaptation criteria according to the present geometry.

example: there is a sw tutorial showing how to model a bearing with its omega support and how it is possible to adapt "automatically" the bearing selection simply by mounting it on a tree with a diameter between those "parameterized"

it is possible to do different things ina utomatic, example if you have lids with holes, cutters and seats and you do not want to manually repeat all the feautures you create the "intelligent" component. consists in creating the cover and a "fantasm" part that simulates the wall of support with all the processing. in the axieme that you want then inserts the part "cover" and will be created with 2 clicks all the processing.

as soon as I decide to write 4 rows with some image the places, however on the help there is everything

 

[falonef]

So if I put a screw in my construction, I could:
- make sure to automatically create the respective fixing holes
- replace the screw for e.g. m5 with a m6 and automatically adapt the respective holes?

Is that it?

 

[meccanicamg]

exactly. does exactly what you mentioned in your two points.
I, for example, also do carpentry with tubular squares and need to internally stop the profiles and make a drilling m16 I created some smart feautures that I put in the library that:

- drag in the multibody part of carpentry
- I'm being asked for the end face of the pipe
- the user-level selection of the profile type (I set 60x60 and 80x80)
- the two consecutive sides of the framework profile
- the centre of the profile

and magically creates the desired measuring parallelepiped and the threaded hole.

the same thing to insert aluminum rivets with central threaded hole... in the sheets:
- drawing sheet metal
- I'll do the holes where I need them.
- drag the rivet into the multibody part
- asks me face and center and rivet model (m6...m8 etc)

so I do not have in the hole archive from ø9.6 from which you do not understand how to store the parts but I have the threaded m6 rivet.