welding with custom profiles

[IlFincoITA]

Hello, everyone! I started using custom profiles for welding. are the usual normalized aluminum but I lightened them as a drawing keeping me the most important geometries. But it happens to me, once you create the feature welds, that these profiles fit a little... forcing me to shorten the structural elements by hand with the appropriate function. that you know is due to the kind of sketch I use? that have edges that fall... Is there something wrong?

 

[Ivan1990]

Hello, everyone! I started using custom profiles for welding. are the usual normalized aluminum but I lightened them as a drawing keeping me the most important geometries. But it happens to me, once you create the feature welds, that these profiles fit a little... forcing me to shorten the structural elements by hand with the appropriate function. that you know is due to the kind of sketch I use? that have edges that fall... Is there something wrong?

I hope to make myself understand practically the points where the profile penetrates, in the sketch is a simple fit formed by 3 sides, I put you image on how I solved the problem myself.

 

[Mike1967]

I hope to make myself understand practically the points where the profile penetrates, in the sketch is a simple fit formed by 3 sides, I put you image on how I solved the problem myself.

... you are a genius...:smile: ... and doing it a few tenths you can't even see anymore. :finger:

 

[Ivan1990]

... you are a genius...:smile: ... and doing it a few tenths you can't even see anymore. :finger:

Thank you, every now and then I try to adapt myself:

 

[SolidUser]

Great ivan.
However, it would be correct that there was a notice to the dealer or an improvement request.

 

[Pablo]

I've been exhuming this topic for a few months.... .
about custom profiles: time ago I downloaded from some library site that I sometimes use, but have the inconvenience of not having an adequate description.... is there any way to match the descrtion to the file name? I tried assigning to the property "description" the value sw-filename but it doesn't work... it would be nice there was a "automatized" way to do this, if not I will do it little by little time in manina!
Thanks to those who can help me.